cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
19575
Views
8
Helpful
3
Comments

Improved Access to Personal Address Book

Administrators can now set up a service URL that allows users to get fast access to their Personal Address Book (PAB) as a service without having to authenticate each time:

The administrator modifies a phone button template to associate a service URL and then assigns the phone button template to the user's phone.

In Cisco Unified CM User Options, the user assigns the service URL to an existing line button on the phone. The user can then press the line button to access the PAB without having to authenticate.

Cisco Unified CallManager Administration Configuration Tips

Use the following tips to configure fast access to PAB in Cisco Unified Communications Manager Administration:

•Configure PAB as an IP phone service.

•Modify a phone button template to associate a service URL with a line button

GUI Changes

The following fields on the IP Phone Services Configuration parameters support creation of the PAB phone service.

–Service Name and ASCII Service Name—Enter a name to identify the service.

–Service URL—Enter the URL to access the PAB.

User Tips

In Cisco Unified CM User Options, the user assigns the service URL to an existing line button on the phone. The user can then press the line button to access the PAB without having to authenticate.

Before the user can assign a line button for PAB, the system administrator must configure the phone to display services.

For More Information

•IP Phone Services Configuration, Cisco Unified Communications Manager Administration Guide

•Phone Button Template Configuration, Cisco Unified Communications Manager Administration Guide

•Guidelines for Customizing Phone Button Templates, Cisco Unified Communications Manager System Guide

•Cisco Unified IP Phone Guides


Improved Address Book Configuration Procedure:-

1. Create a phone service named personal directory, etc.

Go to Device>Device Settings>Phone service

2. Specify the url given below in service URL* section

Use the following url for adding personal address book

http://ServerIPAddress:8080/ccmpd/login.do?name=#DEVICENAME#&service=pab

note-> we can use following url for adding fastdial

http://10.70.190.40:8080/ccmpd/login.do?name=#DEVICENAME#&service=fd


3. Add the following service parameters (no default value)

- pin - userid

4 In the userid field enter users id

5. In the pin field, enter their PIN

6. Go to the phone you would like to add the service to.

7. Go to related links -> Subscribe/Unsubscribe Services

8. Select the service you created -> next

9. Subscribe service to phone, save, and reset phone.

Add as a Service URL to phone button if you want.

Comments
oosama123
Level 1
Level 1

thank you , but when i did all steps ts gives me error unsuccessful authentication even before i enter any userid

sven.stubbe
Level 1
Level 1

Hi,

on which CUCM version did you try it?
I got errors with CUCM 10.5(2)SU2a (always got error message: "Error in Authentication"). With CUCM 11.5(1)SU1 everythig worked fine.

Regards,
Sven

JeroenNijs
Level 1
Level 1

I just tried to add the service url on my CUCM 10.5.2.13900-12

 

http://ServerIPAddress:8080/ccmpd/login.do?name=#DEVICENAME#&service=pab

I always get Host Not found message

 

When I use the FastDial url. It works fine.

http://ServerIPAddress:8080/ccmpd/login.do?name=#DEVICENAME#&service=fd

 

Any ideas?

Did the url change for Personal address book?

I want to get immediately to personal address book without the menu

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: