on 06-11-2009 02:10 AM
It is mandatory to install the jtapi client on the CUCM PG (which is PG1 in this setup) machine. So that it can talk to the CUCM via JTAPI interface. Download the client from the CUCM and install it on the PG1 machine.
Once done, there is a new process called jtapigw on the PG1 server which should be active even if no agent or phones are created in the CUCM. Don't forget to associate the agent's phone devices and CTI Route Point with the "jtapi" user in CUCM.
VRU PG communicates with CVP.
5000 is the default VRU connect port for CVP.
CTI Server (ctisvr) can also be called CG (it can be think of as CTI PG although it is not the right name). It connects to CTI OS Server using ctidriver service running on the CTI OS Server machine.
Logically it can be viewed as following
From the installation menu select CTI Server option
42027 is the listening port on the CG. And in the later section of this document, you will notice that we will configure CTIOS Server so that it can connect to CTI Server (CG) on port 42027
The Peripheral ID here is the same ID that was assigned during the CUCM PG configuration in the Configuration Manager on AW. Because essentially the agent desktop will talk to the CUCM IP Phone.
The listen port is where CTI Desktop Agent will connect. This port will also be used if a secondary CTIOS Server wants to talk to this one in High Availability environment or setting.
After the installation is done, install necessary patches.
Next Step - AW Configuration Manager Setting for Contact Center
Shahzad,
Thanks a ton mate for posting this information.
Most useful!
Cheers,
Naresh
Naresh,
Thanks a lot for appreciating it and commenting on this doc. Feedbacks really help us understand what customer are looking for and allow us to buy more time to produce such documents on the frequent basis.
Shahzad
well done man, excellent effort.
In similar way can MRPG be configured?
I was trying to install the CTIOS on the same machine where ctisvr is installed but it is giving a error saying port 42027 is in use and cti os installation fails.
also if i want to use the CAD option what should i do
Thanks in advance
Probably it's better to use the default ctios port (42028).
Hi Shahzad,
Thanks for this detailed steps. For finesse what is the purpose of the AWDB server IP configuration, does finesse talk to AWDB for fetching the configuration data?
Hi Salim,
Finesse needs to authenticate agents when they attempt to login against the AW server. This is why you need to provision the AW server finesse talks to.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: