Setting Up a Cisco VPN on RV220W

Document

Aug 11, 2012 7:19 PM
Aug 11th, 2012

Download the Cisco QuickVPN utility from the link below:


http://www.cisco.com/en/US/prod/routers/quick_vpn.html

Enable Remote Management under Administration.

Use port 443 or 60443. Please try both & se which one works the best.

DO NOT ENABLE any other Port Forwards.

VLANS are OK if they have InterVlan routing enabled.

Under a VLANS create a new VPN user.

Enter the username and password.

Do not use any special characters & make sure they are at least 6 cahracters long.

Enter your Profile Name username password & server address & port in QuickVPN.

If you run into problems try the prot scanner at yougetsignal.com to see if your ports are opened.

Download the Cisco QuickVPN utility from the link below:
http://www.cisco.com/en/US/prod/routers/quick_vpn.html

Enable Remote Management under Administration.

Use port 443 or 60443. Please try both & se which one works the best.

DO NOT ENABLE any other Port Forwards.

VLANS are OK if they have InterVlan routing enabled.

Under a VLANS create a new VPN user.

Enter the username and password.

Do not use any special characters & make sure they are at least 6 cahracters long.

Enter your Profile Name username password & server address & port in QuickVPN.

If you run into problems try the prot scanner at yougetsignal.com to see if your ports are opened.

Actions

This Document