×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CSV File Import on RV180 and RV180W

Document

Fri, 07/08/2016 - 16:40
Apr 26th, 2016
User Badges:

Cisco Support Community

Article ID: 2036

Objective

This article explains on how to import a user database using a Comma Separated Value (.csv) file. This feature can be used to import a user database file which adds users to the RV180 or RV180W routers.

The format of the .csv file is as follows:

"SNMPv3USER code","userName","accesType","SecurityLevel","authAlgo","authPassword","privAlgo","privPassword"
Possible values are:

• SNMPv3USER code – 3
• userName – cisco/guest
• accessType – RWUSER/ROUSER
• securityLevel – [integer]
• authAlgo – MD5/SHA
• authPassword – [String]
• privAlgo – DES/AES
• privPassword – [String]

"PPTPUSER code","userName","password"
Possible values are:

• PPTPUSER code – 2
• userName – [String]
• password – [String]

"IPSECUSER code","userName","password","UserType","AllowChangePassword"
Possible values are:

• IPSECUSER code – 1
• UserName – [String]
• Password – [String]
• UserType – [boolean] (0-StandardIPSec / 1-Cisco Quick VPN)
• AllowChangePassword – [boolean]

Applicable Devices

• RV180 VPN Router
• RV180W Wireless-N Multifunction Router

CSV File Import

Step 1. Use the Configuration Utility of the router to choose Administration > CSV File Import. The CSV File Import page opens.

Step 2.  Click Browse and locate the .csv file in the computer.

Step 3.  Click Import to import the file.

Loading.

Actions

This Document