Save Voice Configuration as XML on SRP520 Series Service Ready Platforms

Document

Thu, 07/07/2016 - 05:11
Apr 26th, 2016
User Badges:

Cisco Support Community

Article ID: 2607

Objective

The Backup Configuration on SRP520 series will not save the voice configuration. However, the voice configuration can be saved as an XML file manually. The objective of this article is to guide on how to save the voice configuration as XML on SRP520 series service ready platforms.

Applicable Devices

  • SRP520 Series

Save Voice Configuration

 

Step 1. Open a web browser. To save the voice configuration enter the following URL in the address bar:

http://192.168.15.1/admin/config.xml&xuser=admin&xpassword=<Enter your Administrator Password>

Note: You have to enter your administrator password at the end of the URL as mentioned above.

 

Step 2. When the page opens up, choose File > Save as ... to save the configuration.

Step 3. Enter the desired file name followed by the extension .xml and click Save. The voice configuration will be saved on the local computer.

Note: Alternatively, when the XML file appears in your browser, right click to View Source, then save that file as mentioned above.

Loading.

Actions

This Document