×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Edit Access Points on RV120W and RV220W

Document

Sat, 07/09/2016 - 08:20
Apr 26th, 2016
User Badges:

Cisco Support Community

Article ID: 1489

Objective

An access point's properties can be edited to make it only available at certain times of the day, restrict the number of endpoints that can use the access point, or separate the access point from the other wireless networks in the Cisco RV120W and RV220W devices.

Applicable Devices

• RV220W
• RV120W

Edit Access Point Properties

Step 1. Use the web configuration utility to choose Wireless > Basic Settings. The Basic Settings page opens.

             Step 2. Check the box in the row of the Access Point that is to be edited.

Step 3. Click Edit.

Step 4. Edit the SSID name to your preference.

Step 5. Enter the VLAN number associated with the access point.

Step 6. In the Max Associated Clients field, enter the maximum number of endpoints that can use this access point.

Step 7. Click Save to apply changes.

Loading.

Actions

This Document