Basic Setup Configuration on the WET200 Wireless-G Ethernet Bridge


Fri, 07/08/2016 - 14:10
Apr 26th, 2016
User Badges:

Cisco Support Community

Article ID: 1471


This document explains the basic setup configuration of WET200 such as the hostname, description on the WET200 ethernet bridge using configuration utility.

Applicable Devices

• WET200 Wireless-G Ethernet Bridge

Basic Setup Configuration

Step 1. Choose Setup > Basic Setup using configuration utility of the WET200 ethernet bridge.

Step 2. Enter a host name for the device in the Host Name field. Other devices within the LAN can access the ethernet bridge with this host name.

Step 3. Enter a description for the ethernet bridge in the Device Name(Description) field. The name can be up to 39 characters.

Step 4. Enter the contact information for the access point (ethernet bridge).

Step 5. Enter the location or area where the access point resides.

Step 6. Click Save to save the settings.



This Document