×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Configuration of Port Mirroring on RVS4000

Document

Fri, 07/08/2016 - 18:40
Apr 26th, 2016
User Badges:

Cisco Support Community

Article ID: 565

Objective

Port Mirroring is a feature used to send a copy of network packets to a network monitoring connection. Port mirroring sends traffic from one port to another without interfering because it has the ability to copy the traffic from a single port to a mirror port. This process is commonly used for network appliances that are required to monitor network traffic, and analyze and debug data or diagnose errors on a network. Port Mirroring on the RVS4000 helps monitor traffic destined to a particular port.

The objective of this document is to explain how to configure Port Mirroring on RVS4000.

Applicable Devices

• RVS4000

Software Version

• 2.0.3.2

Port Mirroring on the Router

Step 1. Log in to the web configuration utility and choose L2 Switch > Port Mirroring. The Port Mirroring page opens:

Step 2. Check the Mirror Source check box for the desired port. Traffic on this port is copied to the Mirror Port.

Step 3. Choose the appropriate destination port from the Mirror Port drop down list.

Step 4. Click Save to save the Port Mirroring settings.

Loading.

Actions

This Document