Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Manage Schedules on the WAP125


Fri, 06/16/2017 - 00:00
Jun 14th, 2017
User Badges:

Cisco Support Community

Article ID: 5593


Schedules are useful when managing certain features of the router. An administrator can assign a schedule to a rule or policy with a specific start and end time, and assign them to specific days of the week. This feature allows you to seamlessly activate and deactivate policies during any time of the day.

The WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE allows you to configure up to 16 scheduler profile rules under a single profile. By default, there are no profiles configured.

The objective of this document is to show you how to manage a schedule on the WAP125.

Applicable Devices

  • WAP125

Software Version


Configure a Schedule

Add a Schedule

Step 1. Log in to the web-based utility and choose Wireless > Scheduler.


Step 2. Check the Enable Administrative Mode check box to enable administrative mode.


In the Scheduler Operational Status area, the two entries are described:


  • Status — This is the operational status of the schedule. Displayed values can be either Enabled or Disabled. The default is Disabled.
  • Reason — Purpose of the schedule functional status. Possible values are the following:

– IsActive — The scheduler is administratively enabled.

– Administrative Mode is disabled — The scheduler administrative mode is disabled.

– System Time is out dated — The system time is outdated and needs to be reconfigured.

– Managed Mode — The scheduler is in managed mode.

Note: In this example, the Status is Enabled and the Reason is IsActive.

Step 3. In the Create a ProfileName field under the Scheduler Profile Configuration, create a unique name for the schedule. The name must not contain any spaces or special characters. The maximum number of characters is 32.

Note: For this example, ClientSchedule is used.


Step 4. Click Add.


Step 5. In the Profile Rule Configuration area, choose a profile from the Select A Profile Name drop-down list.

Note: In this example, ClientSchedule is chosen.


Step 6. (Optional) If you want to delete an existing Profile, choose a profile name from the drop-down list and click Delete.


Step 7. In the Profile Rule Table, click the AB_Manage%20Schedule%20on%20the%20WAP125_06012017_Step%207.PNG button to create an entry under the profile rule. Up to 16 profile rules may be configured under each profile name.

Step 8. Check the check box of the corresponding profile rule entry that you want to edit.

Step 9. Click the AB_Manage%20Schedule%20on%20the%20WAP125_06012017_Step%209.PNG button to edit the corresponding profile rule entry.

Step 10. From the Day of the Week drop-down list, choose a specific day of the week or choose Daily, Weekday, or Weekend to quickly assign the schedule to a group of days in the week.

Note: For this example, Monday is chosen.


Step 11. Using Military Time Format, enter a specific start time and end time in the respective Start Time and End Time drop-down lists for the schedule to take effect.

Note: For this example, 07:00 and 14:00 are used.


Step 12. Click AB_Manage%20Schedule%20on%20the%20WAP125_06012017_Step%2012.PNG .

Step 13. (Optional) Repeat Steps 3 to 12 to create multiple rules under one profile name.

You should now have successfully configured a schedule on the WAP125.



This Document