Resolution
The default IP address for the wireless bridge is 10.0.0.1. To assign a static IP address to a wireless bridge, refer to these documents:
Note: When connecting the PC to the bridge or reconnecting the PC to the wired LAN, it may be necessary to release and renew the IP address on the PC. On most PCs, a release and renew can be performed through a PC reboot. To do this, the ipconfig /release and ipconfig /renew commands can be issued in a Command Prompt window. For detailed instructions, consult the PC operating instructions.
Problem Type
Cannot console or telnet or GUI into a device since the device does not have an IP address
Products
Bridge