cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2641
Views
0
Helpful
2
Comments
James.Muzyanda1
Community Member

Dear All,

I am trying to set up a Wireless Bridge between two locations using Cisco Bridge Aironet 1410 Series with Aironet Anttena 24dbi. The radio set at the main office is in Root mode and the site radio is non-root.

Root IP information:

IP: 192.168.3.20/24

radio encryption settings: TKIP

Client authenticated key manegement: mendatory with WPA pre-shared key

All these 2 radios have the same SSID.

The issue is that the non-root radio is unable to associate with the root radio, I am getting the error message: INTERFACE DOT11RADIO0 CANNOT ASSOCIATE RCVD RESPONSE FROM 003a.997c.b461 channel 161 15632 and sometimes I get the second error message "PACKET TO CLIENT 003a.997c.b461 REACHED MAX RETRIES REMOVING THE CLIENT

Can please assist me to solve this error message?????

James

Comments

I am also having a problem getting a bridge setup, and am seeing your first error

*Mar  1 00:21:27.011: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Rcvd response from 6cfa.8919.1840 channel 2 3103
 

 

were you able to solve the problem ?

 

NetadminTX

paulhesse1
Level 1
Level 1

Did this get answered I have the same issue -

*Mar 1 12:55:21.135: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 12:55:21.719: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 12:55:21.723: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 12:55:22.135: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 12:55:34.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response
*Mar 1 12:55:46.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Rcvd response from 6cfa.8918.12e0 channel 3 3240
*Mar 1 12:57:01.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Authenticating
*Mar 1 13:02:59.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
 
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: