Buy or Renew
Buy or Renew
Cisco Virtual Engineer generative AI bot now active in Wireless Discussion Forum. Learn more.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Create a new article
6081
Views
20
Helpful
0
Comments

Clarifying the upgrade path to Prime Infrastructure 1.3.0.20 Update 4

Eric Havill
Cisco Employee
Cisco Employee

‎06-27-2013 02:11 PM - edited ‎11-18-2020 03:03 AM

Upgrade  note:   If you have an HA setup, it's important to note that HA must be  REMOVED (not just disabled) prior to starting an upgrade.   Administration > High Availability > HA Configuration > Remove  button.

 

Note regarding PI_1_3_0_20-Update.1.12.tar.gz:  this patch is NOT required to apply PI_1_3_0_20-Update.4.16.tar.gz, however, if you have already applied this patch, Update.4.16 can be applied directly over any other PI_1_3_0_20-Update.1.xxxx.tar.gz patches.

 

PI_1_3_0_20-Update.4.16.tar.gz is a cumulative patch, consisting of Update 1 and internal updates 2 & 3, as well as the Chrome patch (CSCui77571).

 

 

Current VersionUpgrade PathRequired Files - in install orderNotes

NCS 1.1.0.58

1.1.0.58 => 1.3.0.20 Update 4

ncs_patch-1.1.0.58-upgrade-12.tar.gz

Patch required to upgrade to PI 1.3.0.20.  Backup and Restore required before proceeding.

  

PI-upgrade-bundle-1.3.0.20.tar.gz

Upgrade bundle taking current patched version to PI 1.3.0.20

  

PI_1_3_0_20-Update.1.12.tar.gz

Patch taking to PI 1.3.0.20 Update 1 - Not required, but if you have already applied this patch, here is where you are in patch sequence.

  

PI_1_3_0_20-Update.4.16.tar.gz

Patch taking to PI 1.3.0.20 Update 4 (this patch can be installed on top of all other "PI_1_3_0_20-Update.1" patches, but those others are not required)

    

NCS 1.1.1.24

1.1.1.24 => 1.3.0.20 Update 4

ncs_1_1_1_24-Update.13.4.tar.gz

Patch required to upgrade to PI 1.3.0.20.  Backup and Restore required before proceeding.

  

PI-upgrade-bundle-1.3.0.20.tar.gz

Upgrade bundle taking current patched version to PI 1.3.0.20

  

PI_1_3_0_20-Update.1.12.tar.gz

Patch taking to PI 1.3.0.20 Update 1 - Not required, but if you have already applied this patch, here is where you are in patch sequence.

  

PI_1_3_0_20-Update.4.16.tar.gz

Patch taking to PI 1.3.0.20 Update 4  (this patch can be installed on top of all other "PI_1_3_0_20-Update.1"  patches, but those others are not required)

    

NCS 1.1.2.12 (FIPS) - See Service Advisory below

1.1.2.12 => 1.3.0.20 Update 4

 

Must take a backup of existing 1.1.2.12 and restore into a patched version of 1.3.0.20 (new server)

  

NCS-patch-1.3.0.20-CSCue74129.tar.gz

Patch required on top of 1.3.0.20.  Once patch is installed, you can restore the backup from 1.1.2.12

  

PI_1_3_0_20-Update.1.12.tar.gz

Patch taking to PI 1.3.0.20 Update 1 - Not required, but if you have already applied this patch, here is where you are in patch sequence.

  

PI_1_3_0_20-Update.4.16.tar.gz

Patch taking to PI 1.3.0.20 Update 4   (this patch can be installed on top of all other "PI_1_3_0_20-Update.1"   patches, but those others are not required)

    

NCS 1.1.3.2 (FIPS) - See Service Advisory below

1.1.3.2 => 1.3.0.20 Update 4

 

Must take a backup of existing 1.1.3.2 and restore into a patched version of 1.3.0.20 (new server)

  

NCS-patch-1.3.0.20-CSCue74129.tar.gz

Patch required on top of 1.3.0.20.  Once patch is installed, you can restore the backup from 1.1.3.2

  

PI_1_3_0_20-Update.1.12.tar.gz

Patch taking to PI 1.3.0.20 Update 1 - Not required, but if you have already applied this patch, here is where you are in patch sequence.

  

PI_1_3_0_20-Update.4.16.tar.gz

Patch taking to PI 1.3.0.20 Update 4   (this patch can be installed on top of all other "PI_1_3_0_20-Update.1"   patches, but those others are not required)

    

PI 1.2.0.103

1.2.0.103 => 1.2.1.12 => 1.3.0.20 Update 4

pi_1.2.1.12_update.tar.gz

Installed on 1.2.0.103, upgrades to 1.2.1.12

  

PI_1_2_1_12u-Update.1.tar.gz

installed on upgraded server now running 1.2.1.12.  This fixes bug CSCue50717.

  

PI-upgrade-bundle-1.3.0.20.tar.gz

Upgrade bundle taking current patched version to PI 1.3.0.20

  

PI_1_3_0_20-Update.1.12.tar.gz

Patch taking to PI 1.3.0.20 Update 1 - Not required, but if you have already applied this patch, here is where you are in patch sequence.

  

PI_1_3_0_20-Update.4.16.tar.gz

Patch taking to PI 1.3.0.20 Update 4   (this patch can be installed on top of all other "PI_1_3_0_20-Update.1"   patches, but those others are not required)

    

PI 1.2.1.12

1.2.1.12 => 1.3.0.20 Update 4

PI_1_2_1_12-Update.1.0.tar.gz 

Patch required to upgrade to PI 1.3.0.20

  

PI-upgrade-bundle-1.3.0.20.tar.gz

Upgrade bundle taking current patched version to PI 1.3.0.20

  

PI_1_3_0_20-Update.1.12.tar.gz

Patch taking to PI 1.3.0.20 Update 1 - Not required, but if you have already applied this patch, here is where you are in patch sequence.

  

PI_1_3_0_20-Update.4.16.tar.gz

Patch taking to PI 1.3.0.20 Update 4   (this patch can be installed on top of all other "PI_1_3_0_20-Update.1"   patches, but those others are not required)

    

PI 1.3.0.20

1.3.0.20 => 1.3.0.20 Update 4

PI_1_3_0_20-Update.1.12.tar.gz

Patch taking to PI 1.3.0.20 Update 1 - Not required, but if you have already applied this patch, here is where you are in patch sequence.

  

PI_1_3_0_20-Update.4.16.tar.gz

Patch taking to PI 1.3.0.20 Update 4   (this patch can be installed on top of all other "PI_1_3_0_20-Update.1"   patches, but those others are not required)

 

 

Upgrade   note:   If you have an HA setup, it's important to note that HA must  be  REMOVED (not just disabled) prior to starting an upgrade.    Administration > High Availability > HA Configuration > Remove   button.

 

Documentation Links:

Offical documenation covering Upgrading Prime Infrastructure:  http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/quickstart/guide/cpi_qsg130.html#wp56675

 

Service advisory for NCS 1.1.2.12 and NCS 1.1.3.2:  http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.3/software/advisory/Software_Advisory_CPI_1_1_2_and_1_1_3.pdf

 

Installing the point patch:  http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/quickstart/guide/cpi_qsg130.html#wp69624

Performing Inline Upgrade: http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/quickstart/guide/cpi_qsg130.html#wp65395

 

 

Software Links:

NCS 1.1.0.58 - PI 1.2.1.12 patches: http://tools.cisco.com/squish/53bFA

PI 1.3.0.20 Upgrade Bundle: http://tools.cisco.com/squish/F171c

PI 1.3.0.20 Update 1 & Update 4 patches:  http://tools.cisco.com/squish/ab3d5

 

Reviewing the "Tips for upgrading to Prime Infrastructure " support forums document is also extremely helpful.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents