cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
9179
Views
0
Helpful
0
Comments
TCC_2
Level 10
Level 10

Core issue

The auto-reconnect feature allows VPN 3002 hardware clients to reconnect to ASA without the need to manually enter the user name and password.

Resolution

Complete these steps in order to enable auto-reconnect feature on the Cisco Adaptive Security Device Manager (ASDM):

  1. Choose Configuration > VPN > General > GroupPolicy.

  2. Choose the GroupPolicy you use for your 3002 clients and click Edit.

  3. Choose Client Configuration > Cisco Client Parameters > Store Password on Client System, and then choose the radio button in order to enable it.

  4. Choose the Hardware Client tab and make sure that Require Interactive Client Authentication is set to Disable.

For the command line, refer to this configuration example:

ASA5510(config)#username cisco attributes
ASA5510(config-username)#password-storage enable
ASA5510(config)#
group-policy cisco123 attributes
ASA5510(config-group-policy)#
password-storage enable

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: