Resolution
The Simple Gateway Monitoring Protocol (SNMP) Object Identifier (OID) is used to query the in use and available Digital Service Zero (DS0) channels.
The MIB you need to look at is CISCO-POP-MGMT-MIB.
This is the OID in question:
.1.3.6.1.4.1.9.10.19.1.1.4
cpmActiveDS0s OBJECT-TYPE
-- FROM CISCO-POP-MGMT-MIB
SYNTAX Gauge
MAX-ACCESS read-only
STATUS Current
DESCRIPTION "The number of DS0s that are currently in use."
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10)
ciscoPopMgmtMIB(19) ciscoPopMgmtMIBObjects(1) cpmDS0Usage(1) 4 }
For more information, refer to SNMP Object Navigator.
