cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1909
Views
0
Helpful
0
Comments
TCC_2
Level 10
Level 10

Core Issue

7960G SIP phones do not register if they are not directly connected to the Cisco CallManager Express router.  The registration attempts fail and the Contact doesn't match any pools. debug error messages appear.

Resolution

In order to resolve this issue, complete these steps:

  1. Add username cisco password cisco under voice register pool 2
    and configure the same on the phone.

  2. Unlock the phone. The password to unlock it should be cisco then in
    Settings > SIP Config > Line 1, change the Authentication Name and Authentication Password to cisco in order to match the configuration under the pool.

For more information Cisco Unified CallManager Express System Administrator Guide

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: