Core Issue
Monitoring connectivity between elements such as Edge Proxy (EP) and Service Engine (SE), which are configured as server groups.
Resolution
To verify server groups are up, perform these steps:
- Connect to the EP and SE through Telnet by issuing the $ telnet localhost 8070 command.
- Change to context route-mgmt. For example, dsse>context route-mgmt.
- Issue the sg-element-status command to find if the status is marked as up or down. This is an example:
dsse>sg-element-status
All ServerGroups
sg-element -s sipp1.srv-grp -i IP -p PORT -t UDP -q 1.0 -status up
sg-element -s sipp1.srv-grp -i IP -p PORT -t UDP -q 1.0 -status down
Problem Type
Ask a how to ... question
Voice applications (CRS, PA, CCM Plugins, CER, CCC, MeetingPlace, etc.)
Voice Applications
Call Session Control Platform (CSCP)Call Session Control Platform Products
Service Engine (SE)
Subscriber Feature Proxy (SFP)
Edge Proxy (EP)