×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

The "%FIB-4-FIBXDRINV:" or "%FIB-DFC5-4-FIBXDRINV:" error messages appear in Catalyst 6500 series switches with the FlexWAN module and Cisco IOS system software

Document

Wed, 07/22/2009 - 19:52
Jun 22nd, 2009
User Badges:
  • Gold, 750 points or more

Core issue

he error message can looks like this:

%FIB-4-FIBXDRINV:Invalid format. [chars]

%FIB-DFC5-4-FIBXDRINV: Invalid format. [chars]

This means that an internal software error has occurred.

In a scenario, this message can appear after a virtual LAN (VLAN) interface is disabled while servers on a couple of networks are moved to another location. The networks on this pair of switches are disabled and moved to another pair of switches.

Hence, in this scenario, the message means that the Hot Standby Router Protocol (HSRP) MAC address still remains in the adjacency table when the VLAN interface is deleted while still in the administratively up state. The message can be avoided, if the VLAN interface is first put into an administratively down state and then deleted.


Resolution

Either way, the message itself is harmless and is often not indicative of an actual problem.

Open a service request with Cisco Technical Support with the TAC Service Request Tool for more assistance.

Loading.

Actions

This Document

Related Content