×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Windows CE does not recognize client adapter

Document

Wed, 11/18/2009 - 18:21
Jun 22nd, 2009
User Badges:
  • Gold, 750 points or more

Core Issue

User installs client adapter on Windows CE and the operating system does not recognize the card.


Resolution

To resolve this issue, perform these steps:


  1. Remove &  re-insert the client adapter card  and  make sure card is seated correctly.
  2. Try in a dofferent Slot if available.

Note: Windows CE 5.0 is not supported by any of the Cisco Aironet Client Adapter Drivers and firmware. If Windows CE must be used, move to a different version of Windows CE.

For more information, refer to the Troubleshooting section of Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE.


Problem Type

Device OS does not recognize client card


Client OS Type

Win CE

Loading.

Actions

This Document

Related Content

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode