×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

The Cisco VPN Client is unable to connect to the headend device and receives the Sev=Warning/3 CVPND/0xE340000D error message. The Cisco VPN Client is unable to enable the virtual adapter because it cannot set the IP configuration to registry warning

Document

Wed, 07/22/2009 - 19:51
Jun 22nd, 2009
User Badges:
  • Gold, 750 points or more

Core issue

It is possible that Windows did not fill in all the information needed in the registry when it installed the virtual adapter. Setting this manually triggers Windows to initialize what it missed the first time. Sometimes, these warnings are also found:

Sev=Warning/2 CVPND/0xE3400014
The VPN Client could not find the adapters GUID - Virtual Adapter's tcpip GUID failed: 2.

Sev=Warning/2 CM/0xE310000A
The virtual adapter failed to enable


Resolution

To resolve this issue, perform these steps:


  1. Go into the Network Properties and find the Cisco Systems Virtual Adapter.

  2. Open it and assign it an IP address manually. Any IP address can be assigned.

  3. Click OK.

This triggers Windows to initialize what it missed the first time.

Loading.

Actions

This Document

Related Content