WGB LED status

Document

Wed, 11/18/2009 - 18:21
Jun 22nd, 2009
User Badges:
  • Gold, 750 points or more

Core Issue

The three indicator lights on top of the Workgroup Bridge (WGB) report Ethernet activity, operational status, and radio activity.


Resolution

The three indicator lights on top of the Workgroup Bridge (WGB) report Ethernet activity, operational status, and radio activity.


  • The Ethernet indicator signals traffic on the wired LAN, or Ethernet infrastructure. This indicator blinks green when a packet is received or transmitted over the Ethernet infrastructure.

  • The status indicator signals operational status. Blinking green indicates that the bridge is operating normally but is not communicating with an access point. Steady green indicates that the bridge is communicating with an access point.

  • The radio indicator blinks green to indicate radio traffic activity. The light is normally off, but it blinks green whenever a packet is received or transmitted over the bridge's radio.


For more information on interprting the state of the indicator LEDs on the WGB, refer to the Checking the Top Panel Indicators section of  Cisco Aironet 350 Series Troubleshooting.


Problem Type

LEDs


Products

Workgroup bridges

Loading.

Actions

This Document

Related Content

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode