cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1827
Views
0
Helpful
1
Comments
Marcus Hunold
Level 1
Level 1

Hello,

concers to FWSM, PIX, ASA5500series

in Active/Standby with Stateful Failover

I use the Firewall as DHCP Server.

Now I have several DHCP bindings on the Primary (active) Firewall.

Copy the active Firwall the DHCP binding informations to the secondary?

So if there is a failover to the secondary the old DHCP binding informations are not lost?

Comments

Thank you for your posting and interest in the Cisco Support Community.  For best practices on posting documents in this community you can refer to

https://supportforums.cisco.com/docs/DOC-6022#Can_I_use_documents_to_post_technical_questions

For technical questions related to a Cisco Product or Technology, we encourage you to post on the Network Professionals Forum (NetPro). For your question on <specify Cisco Product or technology> you can go to <put the link to the specific forum, . if the question is related to ASA how to troubleshoot firewall, put the post in Firewalling

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: