×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

BTS10200 release 4.5.1- Time of Day Routing Configuration

Document

Mon, 11/09/2009 - 05:41
Nov 9th, 2009
User Badges:

It is possible to make ToD  configuration on BTS10200.


Here on example routing is done as below :


1- Monday through Friday time 18:30 through 08:30  digits starting with 0 is forwarded to route named TO-PGW which is a trunk have a connection between IP network and SS7 network.

2- Saturday through Sunday time 00:00  through 23:59  digits starting with 0 is forwarded to route named TO-PGW which is a trunk have a connection between IP network and SS7 network.

3- All other time accept above are forwarded to route named ROUTE-DUMMY which is a null trunk.


By making above configuration whenever customer trunk is associated with dial-plan named NONPEAK-HOURS then its call is forwarded as rules above.




TABLE: DIAL_PLAN_PROFILE


ID=NONPEAK-HOURS;NANP_DIAL_PLAN=N;OVERDECADIC_DIGITS_SUPP=N;NOA_BASED_ROUTING=N;


TABLE: DIAL_PLAN


ID=NONPEAK-HOURS;DIGIT_STRING=0;DEST_ID=NONPEAK-HOURS;SPLIT_NPA=NONE;DEL_DIGITS=0;MIN_DIGITS=11;MAX_DIGITS=11;NOA=UNKNOWN;


TABLE: DESTINATION


DEST_ID=NONPEAK-HOURS;CALL_TYPE=TOLL;ROUTE_TYPE=ROUTE;ROUTE_GUIDE_ID=NONPEAK-HOURS;ZERO_PLUS=N;INTRA_STATE=Y;GAP_ROUTING=N;CLDPTY_CTRL_REL_ALWD=N;CALL_SUBTYPE=NONE;ACQ_LNP_QUERY=NA;CHARGE_TYPE=NONE;CHARGE_BAND_UNIT=00;


TABLE:  ROUTE_GUIDE


ID=NONPEAK-HOURS;POLICY_TYPE=TOD;POLICY_ID=NONPEAK-HOURS;


TABLE:  POLICY_TOD


ID=NONPEAK-HOURS;START_DOW1=MON;STOP_DOW1=FRI;START_TIME1=1830 ;STOP_TIME1=0830 ;POLICY_TYPE1=ROUTE;POLICY_ID1=TO-PGW;START_DOW2=SAT;STOP_DOW2=SUN;START_TIME2=0000 ;STOP_TIME2=2359 ;POLICY_TYPE2=ROUTE;POLICY_ID2=TO-PGW;DEFAULT_POLICY_TYPE=ROUTE;DEFAULT_POLICY_ID=ROUTE-DUMMY;


TABLE:  ROUTE


ID=ROUTE-DUMMY;DEL_DIGITS1=0;DEL_DIGITS2=0;DEL_DIGITS3=0;DEL_DIGITS4=0;DEL_DIGITS5=0;DEL_DIGITS6=0;DEL_DIGITS7=0;DEL_DIGITS8=0;DEL_DIGITS9=0;DEL_DIGITS10=0;TG_SELECTION=SEQ;NEXT_ACTION=NONE;

Loading.

Actions

This Document

Related Content