It is possible to make ToD configuration on BTS10200.
Here on example routing is done as below :
1- Monday through Friday time 18:30 through 08:30 digits starting with 0 is forwarded to route named TO-PGW which is a trunk have a connection between IP network and SS7 network.
2- Saturday through Sunday time 00:00 through 23:59 digits starting with 0 is forwarded to route named TO-PGW which is a trunk have a connection between IP network and SS7 network.
3- All other time accept above are forwarded to route named ROUTE-DUMMY which is a null trunk.
By making above configuration whenever customer trunk is associated with dial-plan named NONPEAK-HOURS then its call is forwarded as rules above.
TABLE: DIAL_PLAN_PROFILE
ID=NONPEAK-HOURS;NANP_DIAL_PLAN=N;OVERDECADIC_DIGITS_SUPP=N;NOA_BASED_ROUTING=N;
TABLE: DIAL_PLAN
ID=NONPEAK-HOURS;DIGIT_STRING=0;DEST_ID=NONPEAK-HOURS;SPLIT_NPA=NONE;DEL_DIGITS=0;MIN_DIGITS=11;MAX_DIGITS=11;NOA=UNKNOWN;
TABLE: DESTINATION
DEST_ID=NONPEAK-HOURS;CALL_TYPE=TOLL;ROUTE_TYPE=ROUTE;ROUTE_GUIDE_ID=NONPEAK-HOURS;ZERO_PLUS=N;INTRA_STATE=Y;GAP_ROUTING=N;CLDPTY_CTRL_REL_ALWD=N;CALL_SUBTYPE=NONE;ACQ_LNP_QUERY=NA;CHARGE_TYPE=NONE;CHARGE_BAND_UNIT=00;
TABLE: ROUTE_GUIDE
ID=NONPEAK-HOURS;POLICY_TYPE=TOD;POLICY_ID=NONPEAK-HOURS;
TABLE: POLICY_TOD
ID=NONPEAK-HOURS;START_DOW1=MON;STOP_DOW1=FRI;START_TIME1=1830 ;STOP_TIME1=0830 ;POLICY_TYPE1=ROUTE;POLICY_ID1=TO-PGW;START_DOW2=SAT;STOP_DOW2=SUN;START_TIME2=0000 ;STOP_TIME2=2359 ;POLICY_TYPE2=ROUTE;POLICY_ID2=TO-PGW;DEFAULT_POLICY_TYPE=ROUTE;DEFAULT_POLICY_ID=ROUTE-DUMMY;
TABLE: ROUTE
ID=ROUTE-DUMMY;DEL_DIGITS1=0;DEL_DIGITS2=0;DEL_DIGITS3=0;DEL_DIGITS4=0;DEL_DIGITS5=0;DEL_DIGITS6=0;DEL_DIGITS7=0;DEL_DIGITS8=0;DEL_DIGITS9=0;DEL_DIGITS10=0;TG_SELECTION=SEQ;NEXT_ACTION=NONE;
