how to configure ASA 5510 with SSM 10


Dec 1, 2009 2:08 AM
Dec 1st, 2009

i am new in ASA field, i am wanted to configure the ASA 5510 with SSM 10 module (Trend Micro Module)

Say my public IP pool /248

and my LAN IP pool

1st I wanted to internet through ASA. 2Mbps lease line terminate in Ethernet.

please any one help me, if possible.

my e-mail ID-

Average Rating: 0 (0 ratings)


sokakkar Tue, 12/01/2009 - 06:19

Hi Kajal,

For setting up internet access on ASA:

Assuming that Ethernet0/1 is your internet interface and Ethernet0/2 is internal network:

Int e0/1

nameif outside

ip address

int e0/2

nameif inside

ip address

nat (inside) 1 0 0

global (outside) 1 interface

route outside 0 0 <next_hop_on_outside>


You can check the following link on how to initialize AIP SSM:

Then you need to set up policy on ASA to divert the traffic to SSM for inspection:


Login or Register to take actions

This Document

Posted December 1, 2009 at 2:08 AM
Comments:2 Avg. Rating:0
Views:4971 Contributors:2
Tags: No tags.

Documents Leaderboard