VG224 Caller ID Problem


Jan 27, 2010 7:56 AM
Jan 27th, 2010


An Analog Phone with Display is connected to a VG224.
When someone (external or internal) is calling the Analog Phone no Caller ID is visible on the Analog Phone.

The VG224 has IOS 12.4.24T, CUCM Version 7.0.2
VG224 ist configured as SCCP. Caller ID Enable on VG224 is set.

When i call from the Analog Phone to IP Phone everything is fine.

Thanks for Help

Average Rating: 0 (0 ratings)


Greeshma Bernad Wed, 02/03/2010 - 22:32

Thank you for your posting and interest in the Cisco Support Community.  For best practices on posting documents in this community you can refer to

For technical questions related to a Cisco Product or Technology, we encourage you to post on the Cisco Support Community NetPro Discussions. For your specific issue, you can go to IP Telephony discussions forum.


Login or Register to take actions

This Document

Posted January 27, 2010 at 7:56 AM
Comments:1 Avg. Rating:0
Views:1922 Contributors:1
Tags: No tags.

Documents Leaderboard