Cisco IP Telephony Devices Provisioning Guide


Feb 24, 2009 8:44 AM
Feb 24th, 2009

This document is written for service providers who offer services using Cisco Small Business Pro (and Linksys) VoIP Products and specifically for administrative staff responsible for remote provisioning and preprovisioning SPA devices.

There are two available Provisioning Guides :


Average Rating: 4 (1 ratings)


Dan Lukes Wed, 08/29/2012 - 14:15

Released in august 2012, claimed to be "replaced 2009 version of provisioning guide with 2012 version"

List of supported devices: PAP2T, SPA[23]102, SPA8000, WRP400, SPA30[13], SPA50x, SPA525G/G2

Where is SPA1[12]2 ? Does it mean that Cisco doesn't feel those devices to be ready for production deployment ?

Patrick Born Thu, 08/30/2012 - 14:28 (reply to Dan Lukes)

Hi Dan,

My mistake. Thanks for letting me know.

We have a Provisioning Guide specific to the SPA1xx ATA and another Provisioning Guide for all other devices. This is our attempt at making documents that are specific to a product that will hopefully make the document easier to use.




Dan Lukes Thu, 08/30/2012 - 14:42 (reply to Patrick Born)

Thank you very much for explanation and for SPA1x2 provisioning guide. I aprecitate fast and helpfull response.

Just note - as we have hybrid networks (e.g. mix of SPA50x, PAP2T and SPA1x2) with common provisioning, it is better for me to have all information withing one document, showing diferences between devices. Separate documentsrequire depth-in analysis to found differences by myself.

Just declaration of my preferences - I'm not complaining.

Dan Lukes Fri, 02/01/2013 - 15:49

As of 1.3.1 firmware release, the document should be updated. The TFTP is not the only choice for auto-configuration by using a local DHCP server during SP-CUST phase of provisioning process. Description of Profile_Rule needs to be updated as well (chapter 5, chapter 6).

By the way, the statement claiming that firmware upgrade can't be achieved via HTTPS ("Provisioning Overview" paragraph) seems not to be true for SPA1x2 devices even with pre-1.3.1 firmware.


Login or Register to take actions

This Document

Posted February 24, 2009 at 8:44 AM
Comments:4 Avg. Rating:4
Views:18199 Contributors:2

Related Content

Documents Leaderboard