CME on IPv6

Document

Mon, 10/11/2010 - 06:53
Oct 11th, 2010
User Badges:
  • Cisco Employee,

CME CONFIGURATION (With DHCP):


Platform: Cisco 2851

IOS:  c2800nm-ipvoice_ivs-mz.151-2.T1.bin

Phone Firmware: 9-0-3

Phones: 7945/7965/7961


Enabling IPv6:


ipv6 unicast-routing


DHCP CONFIGURATION:




ipv6 dhcp pool NEW

address prefix FEC0:0:0:1::/64

link-address FE80::/10

link-address FE80::1AEF:63FF:FE62:BA00/10



Interface Configuration:


interface GigabitEthernet0/0



ipv6 address FEC0:0:0:1::/64 eui-64



ipv6 enable

ipv6 dhcp server NEW



CME configuration:



telephony-service

protocol mode ipv6

ip source-address FEC0::1:1AEF:63FF:FE62:BA00 port 2000



*********************************************************************************************************************************

Switch Configuration:


IOS: c3750-ipbasek9-mz.122-55.SE.bin

Platform:  cisco WS-C3750G-48PS


Enabling IPv6:



ipv6 unicast-routing



Vlan Configuration:



interface Vlan10


ipv6 address FEC0:0:0:1::/64 eui-64

ipv6 nd autoconfig prefix

ipv6 nd prefix FEC0:0:0:1::/64



Swicth-Port configuration:
interface GigabitEthernet1/0/9
switchport access vlan 10
switchport mode access
More to follow
Advises welcomed


Loading.

Actions

This Document

Related Content