Cisco Packet Tracer 5.3 problems


Wed, 11/10/2010 - 01:30
Nov 7th, 2010
User Badges:

why Access point don't have CLI interface ? pls add 1242AP with CLI

Doesn't support Launching installed SDM Security Device Manager

can't configure dot11radio it doesnt enter (config-if-ssid)#

commands not included that are important:

ip http server

ip http secure-server

ip authentication open

privilege 15 in username


No TACACS server

No TFTP Server

No Wireless 871W Router with CLI int

i will add more as i find?

ved123qwer Wed, 11/10/2010 - 00:54
User Badges:

just removed cisco packet tracer 5.3 & installed 5.3.1

dot11radio problem still persist

this is how i want to configure it

R(config)#int dot11radio 0/0/0

R(config-if)#ip address

R(config-if)#no shut

R(config-if)#ssid WLAN


R(config-if-ssid)#authentication open


R(config-if-ssid)#no shut

just like Todd Lammle says

but it just don't enter to R(config-if-ssid)#

what could this problem be?

ved123qwer Wed, 11/10/2010 - 00:56
User Badges:

ip classless command is not included in global configuration

its an imp command to configure router as VLSM, right?

ved123qwer Wed, 11/10/2010 - 01:03
User Badges:

Except these problem, Cisco packet Tracer is best Simulator ever.

ved123qwer Wed, 11/10/2010 - 00:59
User Badges:

Why Cisco Packet Tracer 5.3.1 totally have no support to SDM?

you really should include it

why not add SDM right besides Router's Physical/Config/CLI/SDM tab, named GUI or SDM.


This Document