- General FoIP Information
- General Fax Tech Tips and FAQ's
- Passthrough
- Relay
- T.37 Store-and-Forward Fax
- Fax Servers
Welcome to the Cisco Fax Wiki
A repository and one-stop location for everything related to Fax over IP (FoIP) and Cisco voice products
Getting fax communications to work successfully and reliably in IP environments can be more challenging than VoIP. Fax is modulated data and is therefore markedly different than voice. These differences must be taken into account and FoIP should not be treated like VoIP. From QoS to the underlying transport protocols to switchover mechanisms, dealing with FoIP is full of pitfalls and gotchas. The aim of this wiki page is to demystify fax communications in IP networks and provide a comprehensive reference page for anything related to FoIP."
General FoIP Information
Fax, Modem, and Text for IP Telephony
The Definitive Resource for Understanding, Designing, Configuring, and Troubleshooting Fax, Modem, and Text in Today's IP Networks
General Fax Technical Documentation
- Listing of 12.4T IOS Fax Configuration Guides on CCO
- Cisco AVVID Gateway Support for Fax Relay and Fax Pass-Through (CCO)
Miscellaneous Fax and FoIP Links
- Fax on Wikipedia
- IEC Fax Technology Article
- Facsimile Theory
- T.38 Protocol Information
- Faxing over IP networks (discusses FoIP and its problems)
General Fax Tech Tips and FAQ's
- Cisco RTP Payload Types
- Cisco NSE Events
- G3 Modulations
- Cisco Fax Wiki
- Cisco Fax Wiki
- Cisco Fax Wiki
- Cisco Fax Wiki
- Cisco Fax Wiki
- Cisco Fax Wiki
- Important G3 Timers
- Cisco Fax Wiki
Passthrough
Passthrough simply involves the transport of fax information over a low compression codec, such as G.711. In most respects it is like a typical voice call.
Fax/Modem Passthrough (NSE-based)
- NSE Passthrough
- Faxing over IP Using Catalyst 6608 and VG248 (CCO)
- Fax Configuration on a Cisco WS-X6624 with an H.323 Gateway (CCO)
- Cisco Fax Wiki
Cisco ATA
At this time the Cisco ATA only officially supports NSE-based passthrough. On IOS voice gateways, you must use the "modem passthrough" configuration command to successfully send faxes to the ATA.
Fax Pass-through (protocol-based)
Relay
Relay demodulates fax communications and passes the fax data across the IP network using special relay protocols. Cisco voice gateways generally support two types of fax relay, standards-based T.38 fax relay and the pre-standard, propriatary Cisco fax relay.
T.38 Fax Relay
Cisco Fax Relay
- Configuring Cisco Fax Relay (CCO)
- Faxing over IP Using Catalyst 6608 and VG248 (CCO)
- Fax Configuration on a Cisco WS-X6624 with an H.323 Gateway (CCO)
T.37 Store-and-Forward Fax
- Configuring T.37 Store-and-Forward Fax (CCO)
- Fax over IP T.37 Store and Forward Fax (CCO)
- T.37 OffRamp Faxing (CCO)
- T.37 Onramp Faxing (CCO)
- T.37 Fax over IP Configuration Guide for Voice Gateways (older CCO Doc but comprehensive)
Unity Integration
A Cisco voice gateway running T.37 onramp and/or offramp can be integrated directly with Unity.
- Cisco Unity IP Fax Configuration Wizard (download and supporting documentation)
- Unity IP Fax Inbound Gateway Configuration Example (CCO)
- Unity IP Fax Outbound Gateway Configuration Example (CCO)
- Unity IP Fax Outbound Troubleshooting (CCO)
Fax Servers
Cisco Fax Server
The Cisco fax server is simply an OEM of the Captaris RightFax product with a Dialogic fax engine (made up of a hardware-based fax board or the software-based SR140 solution). Integrating via T.38 with Cisco voice gateways and Unified CM, the Cisco fax server handles the faxing piece of a Unified Communications solution.
Windows Fax Server
Windows Fax Service is an off-the-shelf component from Microsoft. When installed on Windows Server 2003/2008 the Service is available for all computers in the domain. There is third pary software that integrates Windows Fax Service with T.37-capable integrated services routers, see http://www.sandlerco.com/t37fsp4cisco.htm for details.