cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
cancel
815
Visitas
0
ÚTIL
1
Respuestas

Que IOS puedo instalar

afigueroa20
Level 1
Level 1

Pues eso quisiera saber que IOS le quedan a este router y de paso como se cuanta memoria tiene en DRAM ya que compre una

HWIC-AP-AG-A y no la puedo utilizar porque el IOS no trae el feature para poder hacerlo

desde ya muchas gracias por su ayuda

Saludos

Router#show ver

Cisco IOS Software, 1841 Software (C1841-ADVSECURITYK9-M), Version 12.4(3a), REL

EASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Thu 29-Sep-05 19:12 by hqluong

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

Router uptime is 1 minute

System returned to ROM by power-on

System image file is "flash:c1841-advsecurityk9-mz.124-3a.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 1841 (revision 5.0) with 234496K/27648K bytes of memory.

Processor board ID FTX0945W0AB

6 FastEthernet interfaces

1 Virtual Private Network (VPN) Module

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

1 RESPUESTA 1

Ricardo Prado Rueda
Cisco Employee
Cisco Employee

Hola:

   Necesitas por lo menos una version 12.4(2)T en tu router para reconocer esta tarjeta:

 

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/1800-2800-3800-series-ap-ag-802-11a-b-g-high-speed-wan-interface-card/product_data_sheet0900aecd8028cc7b.html

 

   La última versión disponible en el release 12.4T para tu router es la 12.4(24)T8 y requires 192 MB en RAM y 64 MB en Flash:

 

http://software.cisco.com/download/release.html?mdfid=279119622&flowid=7351&softwareid=280805680&release=15.1.4M8&relind=AVAILABLE&rellifecycle=MD&reltype=latest

 

Saludos.