WAAS の Application Accelerator となっている WAE の config restore 方法を紹介します。
Application Accelerator の config は、Central Manager に保存されているため、基本的な CLI 設定を行った後、Central Manager に登録することで restore することができます。
以下の手順で restore できます。
1) 以下の基本設定を CLI で restore します。
- hostname
- ip address
- ip default-gateway
- primary-interface
- central-manager address
NO-HOSTNAME#conf t NO-HOSTNAME(config)#hostname WAE612-B WAE612-B(config)#interface GigabitEthernet 1/0 WAE612-B(config-if)# ip address 192.168.64.112 255.255.255.0 WAE612-B(config-if)# exit WAE612-B(config)#ip default-gateway 192.168.64.254 WAE612-B(config)#primary-interface gigabitEthernet 1/0 WAE612-B(config)#central-manager address 192.168.62.41 |
2) Central Manager で offline となっている対象 WAE を Replaceable に設定し、再登録できるようにします。
2-1) Central Manager にログインし、My WAN -> Manage Devices で対象の WAE をクリック
2-2) Activation を選択し、Activate のチェックを外し、Submit をクリックします
2-3) Replaceable のチェックボックスが表示されるので、これをチェックし、Submit をクリック
3) 対象の WAE の CLI に戻り、"cms recover identity default " コマンドで、Central Manager の登録情報を復旧します。
WAE612-B#cms recover identity default Is device identity recovery used for WAFS 3.x device migration to WAAS (yes|no) [no]? Registering WAAS Application Engine... Sending device identity recovery request to Central Manager with address 192.168.62.41 Please wait, initializing CMS tables Successfully initialized CMS tables Registration complete. If core or edge service was enabled on the device you're replacing, this device will be reloaded upon successful activation |
4) "cms enable"コマンドで Central Manager に登録し、コンフィギュレーションを save し、 restore 作業は終わりです。
WAE612-B#conf t WAE612-B(config)#cms enable Please preserve running configuration using 'copy running-config startup-config'. Otherwise management service will not be started on reload and node will be shown 'offline' in WAAS Central Manager UI. management services enabled WAE612-B(config)#end WAE612-B#copy running-config startup-config |
5) Central Manager の My WAN -> Manage Devices で対象の WAE が Online になっていることを確認します。