begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Tue Jan 10 2006, 23:10:07 
!
#version 6.4(19)
!
!
#system web interface version Engine Version: 5.3 ADP Device: Cat5Kadp ADP Version: 1.4 ADK: 40
!
set option fddi-user-pri enabled
set password PASSWORD
set enablepass PASSWORD
!
#system
set system name  core-sup
!
#frame distribution method
set port channel all distribution mac both
!
#snmp
set snmp community read-only      admin
set snmp community read-write     write
set snmp rmon enable
set snmp trap enable  module
set snmp trap enable  chassis
set snmp trap enable  bridge
set snmp trap enable  repeater
set snmp trap enable  vtp
set snmp trap enable  auth
set snmp trap enable  ippermit
set snmp trap enable  vmps
set snmp trap enable  entity
set snmp trap enable  config
set snmp trap enable  stpx
set snmp trap enable  syslog
set snmp trap enable  system
!
#vtp
set vtp domain recordant
set vtp v2 enable
set vlan 1 name default type ethernet mtu 1500 said 100001 state active 
set vlan 20 name Server_Network type ethernet mtu 1500 said 100020 state active 
set vlan 30 name Desktop_Network type ethernet mtu 1500 said 100030 state active 
set vlan 40 name GAM_Network type ethernet mtu 1500 said 100040 state active 
set vlan 50 name VPN_Network type ethernet mtu 1500 said 100050 state active 
set vlan 60 name QA_Network type ethernet mtu 1500 said 100060 state active 
set vlan 70 name VOIP type ethernet mtu 1500 said 100070 state active 
set vlan 100 name External_Network_Ports type ethernet mtu 1500 said 100100 state active 
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active 
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active bridge 0x0 stp ieee 
set vlan 1005 name trbrf-default type trbrf mtu 4472 said 101005 state active bridge 0xf stp ibm 
set vlan 1003 name trcrf-default type trcrf mtu 4472 said 101003 state active parent 1005 ring 0xccc mode srb aremaxhop 7 stemaxhop 7 backupcrf off 
!
#ip
set interface sc0 1 10.200.1.3/255.255.255.0 10.200.1.255

set ip route 0.0.0.0/0.0.0.0         10.200.1.2     
set ip alias default         0.0.0.0
!
#spantree
#vlan parameters             
set spantree portstate 1003 block 1005
!
#set boot command
set boot config-register 0x10f
set boot system flash slot0:cat5000-sup3cvk9.6-4-19.bin
!
#mls
set mls nde disable
!
#http configuration
set ip http server enable
!
# default port status is enable
!
!
#module 1 : 2-port 1000BaseSX Supervisor
set trunk 1/1  auto dot1q 1-1005
!
#module 2 : 1-port Route Switch
!
#module 3 : 24-port 10/100BaseTX Ethernet
set vlan 20   3/21,3/23
set vlan 100  3/1-3
set spantree portfast    3/5-24 enable
!
#module 4 : 24-port 10/100BaseTX Ethernet
set vlan 30   4/1-24
set spantree portfast    4/1-24 enable
!
#module 5 : 24-port 10/100BaseTX Ethernet
set vlan 20   5/17-22
set vlan 30   5/1-16
set vlan 70   5/23-24
set spantree portfast    5/1-24 enable
end