BBR1> sh flash:
Flash card inserted in slot0. Reading filesystem...
Error reading slot0

Flash card inserted in slot0. Reading filesystem...
Error reading slot0
-#- --length-- -----date/time------ path
1      6820820 Mar 01 1993 00:07:44 c2691-i-mz.122-8.T10.bin

25108480 bytes available (6823936 bytes used)



BBR1>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2600 Software (C2691-I-M), Version 12.2(8)T10,  RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 29-May-03 20:23 by kellythw
Image text-base: 0x60008940, data-base: 0x60AF0000

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

BBR1 uptime is 2 weeks, 4 days, 11 hours, 6 minutes
System returned to ROM by power-on
System restarted at 21:40:34 IND Sun Jan 25 2004
System image file is "flash:c2691-i-mz.122-8.T10.bin"

cisco 2691 (R7000) processor (revision 0.1) with 120832K/10240K bytes of memory.
Processor board ID JPE0743119K
R7000 CPU at 160Mhz, Implementation 39, Rev 3.3, 256KB L2 Cache
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
6 Serial(sync/async) network interface(s)
8 ISDN Basic Rate interface(s)
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of non-volatile configuration memory.
31360K bytes of ATA System CompactFlash (Read/Write)

Flash card inserted in slot0. Reading filesystem...
Error reading slot0

Flash card inserted in slot0. Reading filesystem...
Error reading slot0

Configuration register is 0x2102

BBR1>