MATE router configuration: MATE#sh run Building configuration... Current configuration : 2767 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname MATE ! boot-start-marker boot system flash:c2800nm-advipservicesk9-mz.123-14.T5.bin boot system flash:c2800nm-ipvoice-mz.124-2.T1.bin boot-end-marker ! card type e1 0 0 logging buffered 51200 warnings enable password cisco ! no aaa new-model ! resource policy ! no network-clock-participate wic 0 ip subnet-zero ! ! ip cef no ip dhcp use vrf connected ! ip dhcp pool TELEPHONY network 20.20.20.0 255.255.255.240 option 150 ip 20.20.20.2 default-router 20.20.20.2 ! ! ip domain name yourdomain.com no ip ips deny-action ips-interface l2tp-class CLASS_1 authentication hostname MATE password 7 105F1E1C ! ! no ftp-server write-enable pseudowire-class CLASS1 encapsulation l2tpv3 protocol l2tpv3 CLASS_1 ip local interface Loopback0 ! ! ! ! voice service voip allow-connections h323 to h323 ! ! ! voice class codec 1 codec preference 1 g711alaw ! ! ! ! ! ! ! ! ! ! ! username cisco privilege 15 secret 5 $1$.Gml$GQBTg9m1lR0X4JcTocbSl/ ! ! controller E1 0/0/0 clock source internal channel-group 1 timeslots 9-31 ! controller E1 0/0/1 framing NO-CRC4 clock source internal channel-group 2 timeslots 1-8 ! no crypto isakmp ccm ! ! ! ! interface Loopback0 ip address 8.8.8.50 255.255.255.255 ! interface FastEthernet0/0 description LAN no ip address duplex full speed 100 ! interface FastEthernet0/1 ip address 10.0.0.1 255.0.0.0 duplex full speed 100 ! interface FastEthernet0/1.18 encapsulation dot1Q 18 no snmp trap link-status no cdp enable xconnect 5.5.5.50 1 pw-class CLASS1 ! interface FastEthernet0/2/0 switchport access vlan 18 duplex full speed 100 ! interface FastEthernet0/2/1 ! interface FastEthernet0/2/2 ! interface FastEthernet0/2/3 ! interface Serial0/0/0:1 ip address 1.1.1.1 255.0.0.0 ! interface Serial0/0/1:2 no ip address ! interface Vlan1 no ip address ! ip classless no ip route static inter-vrf ip route 0.0.0.0 0.0.0.0 10.0.0.2 ip route 5.5.5.50 255.255.255.255 10.0.0.2 ! ! ip http server ip http authentication local no ip http secure-server ip http timeout-policy idle 5 life 86400 requests 10000 ! ! ! ! tftp-server flash:c2800nm-advipservicesk9-mz.123-14.T5.bin ! control-plane ! ! ! ! ! ! ! ! line con 0 exec-timeout 60 0 login local line aux 0 line vty 0 4 privilege level 15 login local transport input telnet line vty 5 15 privilege level 15 login local transport input telnet ! scheduler allocate 20000 1000 ! end VLAANs MATE#sh vlan-sw VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/2/1, Fa0/2/2, Fa0/2/3 18 VLAN0018 active Fa0/2/0 1002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active show ver: MATE#sh ver Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.3(14)T5, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Mon 24-Oct-05 21:43 by kellythw ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1) MATE uptime is 1 hour, 2 minutes System returned to ROM by power-on System image file is "flash:c2800nm-advipservicesk9-mz.123-14.T5.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2811 (revision 53.50) with 249856K/12288K bytes of memory. Processor board ID FTX1009C1K2 6 FastEthernet interfaces 2 Serial interfaces 2 Channelized E1/PRI ports 1 Virtual Private Network (VPN) Module DRAM configuration is 64 bits wide with parity enabled. 239K bytes of non-volatile configuration memory. 62720K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102 L2tun session: MATE#sh l2tun sess a %No active L2F tunnels L2TP Session Information Total tunnels 1 sessions 1 Session id 36216 is up, tunnel id 952 Call serial number is 110900000 Remote tunnel name is ELTA Internet address is 5.5.5.50 Session is L2TP signalled Session state is established, time since change 00:42:12 0 Packets sent, 0 received 0 Bytes sent, 0 received Last clearing of "show vpdn" counters never Receive packets dropped: out-of-order: 0 total: 0 Send packets dropped: exceeded session MTU: 0 total: 0 Session vcid is 1 Session Layer 2 circuit, type is Ethernet Vlan, name is FastEthernet0/1.18:18 Circuit state is UP Remote session id is 49451, remote tunnel id 8035 DF bit off, ToS reflect disabled, ToS value 0, TTL value 255 No session cookie information available UDP checksums are disabled SSS switching enabled Sequencing is off Unique ID is 2 %No active PPTP tunnels show vpdn: MATE#sh vpdn %No active L2F tunnels L2TP Tunnel and Session Information Total tunnels 1 sessions 1 LocID RemID Remote Name State Remote Address Port Sessions L2TP Class/ VPDN Group 952 8035 ELTA est 5.5.5.50 0 1 CLASS_1 LocID RemID TunID Username, Intf/ State Last Chg Uniq ID Vcid, Circuit 36216 49451 952 1, Fa0/1.18:18 est 00:44:37 2 %No active PPTP tunnels