=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.11.11 20:50:05 =~=~=~=~=~=~=~=~=~=~=~= show ip int brief Interface IP-Address OK? Method Status Protocol FastEthernet0/0 199.1.1.254 YES NVRAM up up BRI0/0 unassigned YES NVRAM administratively down down Serial0/0 unassigned YES NVRAM administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down Serial1/0 unassigned YES NVRAM administratively down down Serial1/1 unassigned YES NVRAM administratively down down Serial1/2 23.1.1.2 YES NVRAM up up Serial1/3 32.1.1.2 YES NVRAM up up Loopback1 22.1.1.1 YES NVRAM up up Loopback2 22.1.1.2 YES NVRAM up up --More--  Loopback3 22.1.1.3 YES NVRAM up up Loopback10 122.1.1.1 YES NVRAM up up Loopback11 24.1.1.1 YES NVRAM up up Loopback12 24.1.1.2 YES NVRAM up up Loopback13 24.1.1.3 YES NVRAM up up Loopback50 2.2.2.2 YES NVRAM up up R2#sh ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 199.1.1.254 - 000c.85da.8ee0 ARPA FastEthernet0/0 R2# R2# R2# *Mar 1 00:05:06.595: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down R2# R2# R2#sh ip arpow ip int brief Interface IP-Address OK? Method Status Protocol FastEthernet0/0 199.1.1.254 YES NVRAM up down BRI0/0 unassigned YES NVRAM administratively down down Serial0/0 unassigned YES NVRAM administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down Serial1/0 unassigned YES NVRAM administratively down down Serial1/1 unassigned YES NVRAM administratively down down Serial1/2 23.1.1.2 YES NVRAM up up Serial1/3 32.1.1.2 YES NVRAM up up Loopback1 22.1.1.1 YES NVRAM up up Loopback2 22.1.1.2 YES NVRAM up up --More--  Loopback3 22.1.1.3 YES NVRAM up up --More--  Loopback10 122.1.1.1 YES NVRAM up up --More--  Loopback11 24.1.1.1 YES NVRAM up up Loopback12 24.1.1.2 YES NVRAM up up Loopback13 24.1.1.3 YES NVRAM up up Loopback50 2.2.2.2 YES NVRAM up up R2#sh run Building configuration... Current configuration : 1781 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname R2 ! boot-start-marker boot-end-marker ! logging buffered 4096 debugging enable password 7 030752180500 ! username cisco password 7 1511021F0725 no aaa new-model ip subnet-zero ! ! ! ip dhcp pool POOL --More--   network 199.1.1.0 255.255.255.0 default-router 199.1.1.254 ! ! ! ! ! interface Loopback1 ip address 22.1.1.1 255.255.255.255 ip ospf network point-to-point ! interface Loopback2 ip address 22.1.1.2 255.255.255.255 ip ospf network point-to-point ! interface Loopback3 ip address 22.1.1.3 255.255.255.255 ! interface Loopback10 ip address 122.1.1.1 255.255.255.255 ! interface Loopback11 ip address 24.1.1.1 255.255.255.255 --More--  ! interface Loopback12 ip address 24.1.1.2 255.255.255.255 ! interface Loopback13 ip address 24.1.1.3 255.255.255.255 ! interface Loopback50 ip address 2.2.2.2 255.255.255.255 ! interface FastEthernet0/0 ip address 199.1.1.254 255.255.255.0 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface Serial0/0 no ip address shutdown ! --More--  interface Serial1/0 no ip address shutdown ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 23.1.1.2 255.255.255.248 ip ospf hello-interval 1 ! interface Serial1/3 ip address 32.1.1.2 255.255.255.248 ! router ospf 20 log-adjacency-changes area 0.0.0.23 virtual-link 3.3.3.3 area 0.0.0.32 virtual-link 3.3.3.3 network 10.1.1.0 0.0.0.3 area 0 network 22.1.1.1 0.0.0.0 area 0 network 23.1.1.2 0.0.0.0 area 0.0.0.23 network 32.1.1.2 0.0.0.0 area 0.0.0.32 --More--  ! ip http server ip classless ! ! access-list 20 permit 32.1.1.3 log ! line con 0 line aux 0 line vty 0 4 password 7 110A1016141D4B login local ! ! ! end R2# R2# R2#sh ver Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.3(3), RELEASE SOFTWARE (fc2) Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Tue 19-Aug-03 16:31 by dchih Image text-base: 0x80008098, data-base: 0x80C9702C ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1) R2 uptime is 5 minutes System returned to ROM by reload System image file is "flash:c2600-i-mz.123-3.bin" cisco 2620XM (MPC860P) processor (revision 0x100) with 28672K/4096K bytes of memory. Processor board ID JAE0714045Y (2869084895) M860 processor: part number 5, mask 2 Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 FastEthernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 4 Low-speed serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) --More--  32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R2# R2# R2# R2#sh ip int brief Interface IP-Address OK? Method Status Protocol FastEthernet0/0 199.1.1.254 YES NVRAM up down BRI0/0 unassigned YES NVRAM administratively down down Serial0/0 unassigned YES NVRAM administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down Serial1/0 unassigned YES NVRAM administratively down down Serial1/1 unassigned YES NVRAM administratively down down Serial1/2 23.1.1.2 YES NVRAM up up Serial1/3 32.1.1.2 YES NVRAM up up Loopback1 22.1.1.1 YES NVRAM up up Loopback2 22.1.1.2 YES NVRAM up up --More--   R2#