cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
4317
Views
0
Helpful
7
Replies

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi

I have  Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.

Thanks in advance!!!

Sincerely yours

Sergey Bondarenko

2 Accepted Solutions

Accepted Solutions

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

To change these parameters, log onto the server, and from a terminal window type:

net

This gives you a menu where you can change the parameters... I would strongly recommend you make sure you have the system backed up before attempting this.

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

Hi

Did you restart the server after making the changes?

Are you still able to dial the MPX system via the phone?

Try these commands on the server to see if things are running:

mpx_tomcat status

mpx_sys status

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

7 Replies 7

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

To change these parameters, log onto the server, and from a terminal window type:

net

This gives you a menu where you can change the parameters... I would strongly recommend you make sure you have the system backed up before attempting this.

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Hi

Thanks for your attention for my humble problem.

I have performed Meeting Place Express configuration through the ā€œnetā€ command.

But now unfortunately I can't connect to meeting place through web browser. I just get blank page.

Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of  cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.

Have you any idea?

A lot of thanks in advance!!

Sincerely yours Sergey Bondarenko

Here I have printed the net configuration output of Cisco meeting Place Express:

[root@cumpxvoice root]# net

This is the MeetingPlace Express network configuration utility.

Up to the point where you save changes, it is safe to hit ^C to get

out at any time, in which case nothing will have changed.

1) List current configuration

2) Configure Ethernet port 1

3) Configure Ethernet port 2

4) Configure service bindings

5) Set host names

6) Set domain name

7) Configure DNS service

8) Configure NTP service

9) Configure routing

10) Done

Select: 1

Primary/audio host name: cumpxvoice

HTTP host name:          cumpxvoice

RTMP host name:          cumpxweb

Domain name:             uclab.com

Service bindings:

Audio:                   port 1 (eth0)

Web browsing (HTTP):     port 1 (eth0)

Web conferencing (RTMP): port 2 (eth1)

Port 1 (device eth0):

IP Address:      10.62.60.116

Network mask:    255.255.255.0

Default gateway: 10.62.60.1

Link setting:    autoneg on

Port 2 (device eth1):

IP Address:      10.62.60.117

Network mask:    255.255.255.0

Default gateway: 10.62.60.1

Link setting:    autoneg on

Static routes:

Destination      Gateway          Network mask     Port

0.0.0.0          10.62.60.1       0.0.0.0          1

DNS Servers:

10.62.60.115

10.0.1.4

Hi

Did you restart the server after making the changes?

Are you still able to dial the MPX system via the phone?

Try these commands on the server to see if things are running:

mpx_tomcat status

mpx_sys status

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Thank you for reply

Yes, I restarted the server.

I'm able to dial MPX via a phone.

I'm not able to connect MPX via Web browser.

Here is the output of commands:

[root@cumpxvoice root]# mpx_tomcat status

-bash: mpx_tomcat: command not found

[root@cumpxvoice root]# mpx_sys status

Status for Cisco MeetingPlace Express:

----------

MeetingPlace Java RMI is running...

rmiregistry (pid 2059) is running...

----------

MeetingPlace database is running...

oninit (pid 2097 2096 2095 2094 2092 2091 2090 2089 2088) is running...

----------

MeetingPlace License Manager is running...

lmgrd (pid 2161) is running...

----------

MeetingPlace application is running...

sim.bin (pid 2280) is running...

db (pid 2310) is running...

snmpagt (pid 2316) is running...

gyromain.bin (pid 2322) is running...

cpgs (pid 2555) is running...

cca (pid 2578) is running...

poserver (pid 2634) is running...

ConfSchd (pid 2646) is running...

twatch (pid 2661) is running...

nmpagent (pid 2691) is running...

vui (pid 2682) is running...

poclient (pid 2673) is running...

----------

breeze dead but subsys locked

fcsedge (pid 3536 2796 2795 2794 2792) is running...

fcscore (pid 2799) is running...

----------

mpe-tomcat-main (pid 3282) is running...

mpe-tomcat-securewebservices (pid 3458) is running...

Aaronharrison thank you for your help

Web access to Cisco MPX is working now. The problem have been solved for now.

I have just typed ā€œmpx_sys restartā€ command in CLI and after reboot MPX is working.

I don't know why it didn't work after the system restart through ā€œshutdown ā€“r nowā€.

Again, thank you a lot for your assistance!!!

Best regards

Sincerely yours

Sergey Bondarenko

No problem, glad you got it fixed up!

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Hi,

I did same thing on MeetingPlace Express 7.

net

option 5 -> change domain name.

save config.

restart by:

/sbin/shutdown -r now

and now when the servers comes up, I can connect to the web interface, but I can't join the web conference.

when I do the browser test it gives me the following:

Player:

Version: 10 Revision:  102

Platform: WIN

Cisco Unified MeetingPlace Express Add-In: Installed

App Server Connection: Successful

Flash Com Connection: Timed Out

server: rtmp://CLN-MPX02.myserver.com:1935/?rtmp://localhost:1935,rtmp://CLN-MPX02.

myserver.com:80/?rtmp://localhost:1935/,rtmpt://CLN-MPX02.

myserver.com:80/?rtmp://localhost:1935/

And the problem is, myserver.com is OLD domain!!!! that's the one I changed.

So I do not understand why is it trying to connect to old domain still?????

Many thanks,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: