There's a mobile version of our website.
i work with an ISP and which have configured eigrp on some of their core routers though it is working normally, i have the following issues always reported to the console and am wondering what to do to correct it. i need expert idears.
the console message
*May 6 12:15:31.444: IP-EIGRP(Default-IP-Routing-Table:18): Neighbor 184.108.40.206 not on common subnet for GigabitEthernet0/1
*May 6 12:15:42.468: IP-EIGRP(Default-IP-Routing-Table:18): Neighbor 220.127.116.11 not on common subnet for GigabitEthernet0/1
asside that am wondering how to make the eigrp routes more preferable than our wirless canopy system which we are using as alternate to the routed network aside changing the bandwith of the eigrp interfaces.
please note that on the routers only the canopy network has been configured with a static route with an administrative distance of 150. thanks.
This article should help you with the eigrp error:
If your routes are statically set at 150, what does the preferred route look like in the routing table? EIGRP has an AD of 90, so 150 would be less preferred than that, which should mean that your eigrp routes will be preferred over the statics.
thanks very much John for the help.
the second issue with the routes is that the eigrp table converges well with the eigrp routes prefered over the radio canopy link but without the " ip route 0.0.0.0 0.0.0.0 18.104.22.168 150 ", which is the only static route, connectivity goes down.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion