cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1285
Views
15
Helpful
3
Replies

Single Number Reach 8.5

Friends,

I am trying to configure the Single Number Reach on my Cluster forwarding the calls to the External Mobile Phone. But the call is not hitting the PSTN GW.

The CSS is perfect on the Remote Destination Profile.. Associated the user with the Line and the Device also associated on the Remote Destination Profile. Checked the Line on the Remote destination Configuration.

I am wondering is there any Service which needs to be invoked for this Single Number Reach. If any once could help me by STEP by STEP Process..

I appreciate you time and help..

Mohsin..

1 Accepted Solution

Accepted Solutions

gmgarrian
Level 4
Level 4

I've attached a doc I made for myself for configuring SNR.

It's very basic and step-by-step.

Hopefully it'll help you out.

View solution in original post

3 Replies 3

gmgarrian
Level 4
Level 4

I've attached a doc I made for myself for configuring SNR.

It's very basic and step-by-step.

Hopefully it'll help you out.

Thank you So much for the Help.. There was some issue with the

Rerouting Calling Search Space which I fixed..

Thank you for the doc.

Mohsin..

Rob Huffman
Hall of Fame
Hall of Fame

Hi "G",

Very helpful doc +5 Thanks for this!

Cheers!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: