12-17-2011 07:52 AM - edited 03-19-2019 04:07 AM
Hi
I upgraded my CUEAC and when a call comes in and the receptionist wants to transfer it to another person it gives her the error that says.
"Unable to transfer call,the following error was returned, no more service queue devices available" what can I do to fix this so she can
transfer her calls properly.Thanks in advance for the help and have a great weekend.
Solved! Go to Solution.
12-17-2011 09:27 AM
Try to Sync the CUCM user on CUEAC sever. As per discussion provided below link for the basic troubleshooting details of CUEAC server.
http://www.arcsolutions.com/north_america/solutions/products/video/Troubleshooting.aspx
There are more than one reasons for this issue. If above troubleshooting procedure doesnt help, I'd recommend opening a TAC case.
I see it as common issue & TAC is well aware of it's quick fixes.
If above helps, pls rate the post.
GP.
12-17-2011 09:27 AM
Try to Sync the CUCM user on CUEAC sever. As per discussion provided below link for the basic troubleshooting details of CUEAC server.
http://www.arcsolutions.com/north_america/solutions/products/video/Troubleshooting.aspx
There are more than one reasons for this issue. If above troubleshooting procedure doesnt help, I'd recommend opening a TAC case.
I see it as common issue & TAC is well aware of it's quick fixes.
If above helps, pls rate the post.
GP.
12-22-2011 06:09 AM
One thing that seems simple enough is that there are actually no more service devices available for a call to be transfered. How many CTI ports do you have built for each function (i.e CT gateway, service, and park). For me personally I always created 10 cti ports for each function. I would then resync between CUEAC and CUCM and make sure all devices are registered properly.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide