There's a mobile version of our website.
I did as you sent ;
but no Output/Result shown. Here is the outcome;
CME-c2921#debug voice application scripts
% Invalid input detected at '^' marker.
CME-c2921#debug voice application script
voip application script debugging is on
If no output, the call doesn't go to B/ACD, have a configuration mistake.
You need incoming called-number, not destination-pattern.
With that, you cause tromboning to PRI immediately.
Do you have clue why i received this message;
CME-c2921#audio-prompt load flash:app-b-acd-aa-18.104.22.168.tcl
Reload of flash:app-b-acd-aa-22.214.171.124.tcl status failed
audio-prompt flash:app-b-acd-aa-126.96.36.199.tcl not loaded - open (or format) failure
I realized some mistake in my configuration "service queue flash:app-b-acd-aa-188.8.131.52.tcl" are the same for aa & queue , which is wrong.
I will correct this tomorrow and let you know
It is getting better ,but need to do some more digging
Here is the result ;
CME-c2921#show call application sessions
Session ID 13E
Session name: service
CME-c2921#13 01:07:36.492: //-1//TCL :EE2C04D2AC000:/tcl_PutsObjCmd: TCL B-ACD: >>> B-ACD Service Running <<<
CME-c2921#Apr 13 01:08:36.608: //-1//TCL :EE2C04D2AC000:/tcl_PutsObjCmd: TCL B-ACD: >>> B-ACD Service Running <<<
CME-c2921#Apr 13 01:08:45.048: //-1/xxxxxxxxxxxx/CCAPI/ccAppShutdownMode: ccAppShutdownMode: remove it from the queue
Here is the Solution
dial-peer voice 1 pots
translation-profile incoming INCOMING
incoming called-number .%==>>This will make incoming call become wildcard that will allowed Pilot number Dial-peer
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion