There's a mobile version of our website.
from internet client usint outlook is unable to connect on 465 port . i opened port on firewall over a public ip on outside interface. does any body have idea to fix this issue.
i am using 7.0
Cisco Adaptive Security Appliance Software Version 7.0(7)
Device Manager Version 5.0(7)
Compiled on Fri 06-Jul-07 10:37 by builders
System image file is "disk0:/asa707-k8.bin"
Config file at boot was "startup-config"
KCO-ASA-BHARTI up 83 days 16 hours
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
access-list 100 extended permit tcp any host x.x.x.x eq 465
access-list 100 extended permit tcp any host x.x.x.x eq smtp
static (DMZ,outside) x.x.x.x 192.168.100.182 netmask 255.255.255.255
The config look all good to me, try taking the captures, you can follow this doc for it:
This would tell you which side is not responding and if the ASA is forwarding all the packets.
this is the issue with the port please check on port 465 need to enable command fixup protocol ? but i am not able to find impact of this command on firewall and other services running behind firewall
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion