01-23-2013 05:13 PM - edited 03-07-2019 11:16 AM
I would like to know why Cat3550 SVI's mac address is always same.
For example if I configure interface vlan1 and vlan2.
mac address is same as like 000d.bdfc.xxxx
But Cat3750 is different, each SVI has unique mac address.
Best Regards,
01-23-2013 05:23 PM
Hi,
The only reference I could see was here
Regards,
Alex.
Please rate useful posts.
03-22-2018 08:52 PM
Catalyst OS (CatOS) on the Supervisor Engine and Cisco IOS® Software on the Multilayer Switch Feature Card (MSFC) (Hybrid): a CatOS image can be used as the system software to run the Supervisor Engine on Catalyst 6500/6000 switches. If the optional MSFC is installed, a separate Cisco IOS Software image is used to run the MSFC.
Cisco IOS Software on both the Supervisor Engine and MSFC (Native): a single Cisco IOS Software image can be used as the system software to run both the Supervisor Engine and MSFC on Catalyst 6500/6000 switches.
please check the below link for more info:-
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6000-series-switches/41263-catmac-41263.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide