Hi Sebastian, I am not sure if you got the answer to this.   Yes the FI's should be connected to 2 different upstream switches as this is a recommended  topology . http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-6120xp-20-port...

Hi Jackson, You can use the below compatibility matrix  and check the same. http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.htmlLet me know if you have any other queries RegardsTeclus Dsouza   

Hi Daniel, Yes its possible to create Private Vlans on UCS .   The attached guide gives step by step instructions on how to go about it . http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-b-series-blade-servers/116310-config-ucs...

Hi Jackson,Yes its is possible.    Connect the storage array to the fabric interconnects using two 10GB links per storage processor.  Connect each SP to both fabric interconnects and configure the ports on the fabric interconnect as “Appliance” ports...