×

Mensagem de aviso

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Wrong IOS in my Cisco Aironet 1130G

Perguntas não respondidas
fev 25th, 2014
User Badges:

Hello 


I have a problem with my Cisco Aironet 1130G series, last time I try to upgrad the IOS but i put the wrong IOS  and then i not be able to access to Flash or delete or write anything in my AP.  pls i Need Help.

nv_done: unable to open "flash:/config.txt.new"

nv_done: unable to open "flash:/config.txt.new"

nv_done: unable to open "flash:/private-multiple-fs.new"[OK]

NVRAM Verification Failed

Proceed with reload? [confirm]

flash:/env_vars.tmp: No such deviceThe filesystem containing the variables may not be initialized yet.


*Mar  1 00:35:07.247: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.Xmodem file system is available.

flashfs[0]: 149 files, 7 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 15998976

flashfs[0]: Bytes used: 5548544

flashfs[0]: Bytes available: 10450432

flashfs[0]: flashfs fsck took 28 seconds.

Base ethernet MAC Address: 44:d3:ca:e5:6a:84

Initializing ethernet port 0...

Reset ethernet port 0...

Reset done!

link auto-negotiating....

auto-negotiation takes 10000 milli-seconds to complete

ERROR: timeout waiting for auto-negotiation to complete

ERROR: fail to bring ethernet link up


The system has been encountered an error initializing

ethernet port. You may need to check hardware

The system is ignoring the error and continuing boot.

If you interrupt the system boot process, the following

commands will reinitialize ethernet, tftp, and finish

loading the operating system software:


    ether_init

    tftp_init

    boot


Loading "flash:/c1310-k9w7-tar.124-25d.JA2/c1310-k9w7-tar.124-25d.JA2.bin"...flash:/c1310-k9w7-tar.124-25d.JA2/c1310-k9w7-tar.124-25d.JA2.bin: no such file or directory


Error loading "flash:/c1310-k9w7-tar.124-25d.JA2/c1310-k9w7-tar.124-25d.JA2.bin"


Interrupt within 5 seconds to abort boot process.

Loading "flash:/c1310-k9w7-mx.124-25d.JA2/c1310-k9w7-mx.124-25d.JA2"...#########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################


File "flash:/c1310-k9w7-mx.124-25d.JA2/c1310-k9w7-mx.124-25d.JA2" uncompressed and installed, entry point: 0x3000

executing...


              Restricted Rights Legend


Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.


           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706




Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(25d)JA2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Wed 12-Sep-12 00:48 by prod_rel_team



Proceeding with system init


Proceeding to unmask interrupts

Initializing flashfs...

Unable to initialize flash device -- device not found.

...done Initializing flashfs.


flash:/env_vars.tmp: No such deviceThe filesystem containing the variables may not be initialized yet.


Radio0  present A506 7100 E8000000 A0000000 80000000 3

Unable to create Frequency bands, Channel / Max Power information not found


This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.


A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


If you require further assistance please contact us by sending email to

[email protected].


cisco AIR-AP1131G-E-K9     (PowerPCElvis) processor (revision A0) with 25590K/7168K bytes of memory.

Processor board ID FCZ1534Q0T7

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

1 FastEthernet interface

1 802.11 Radio(s)


32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 44:D3:CA:E5:6A:84

Part Number                          : 73-11587-03

PCA Assembly Number                  : 800-30422-02

PCA Revision Number                  : A0

PCB Serial Number                    : FOC15311DAM

Top Assembly Part Number             : 800-29578-02

Top Assembly Serial Number           : FCZ1534Q0T7

Top Revision Number                  : A0

Product/Model Number                 : AIR-AP1131G-E-K9



Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.4(25d)JA2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Wed 12-Sep-12 00:48 by prod_rel_team


ROM: Bootstrap program is C1310 boot loader

BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)


ap uptime is 10 minutes

System returned to ROM by power-on

System image file is "flash:/c1310-k9w7-mx.124-25d.JA2/c1310-k9w7-mx.124-25d.JA2"



This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.


A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


If you require further assistance please contact us by sending email to

[email protected].


cisco AIR-AP1131G-E-K9     (PowerPCElvis) processor (revision A0) with 25590K/7168K bytes of memory.

Processor board ID FCZ1534Q0T7

PowerPCElvis CPU at 262Mhz, revision number 0x0950

Last reset from power-on

1 FastEthernet interface

1 802.11 Radio(s)








32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 44:D3:CA:E5:6A:84

Part Number                          : 73-11587-03

PCA Assembly Number                  : 800-30422-02

PCA Revision Number                  : A0

PCB Serial Number                    : FOC15311DAM

Top Assembly Part Number             : 800-29578-02

Top Assembly Serial Number           : FCZ1534Q0T7

Top Revision Number                  : A0

Product/Model Number                 : AIR-AP1131G-E-K9


Configuration register is 0xF



ap#sh fla

ap#sh flash:

       ^

% Invalid input detected at '^' marker.


ap#del

ap#delete ?

  /force             Force delete

  /recursive         Recursive delete

  nvram:             File to be deleted

Unknown file system


p#sh inventory

NAME: "AP1130", DESCR: "Cisco Aironet 1130 Series (IEEE 802.11a/g) Access Point"

PID: AIR-AP1131G-E-K9  , VID: V02, SN: FCZ1534Q0T7



ap#sh ip interface brief

Interface                  IP-Address      OK? Method Status                Protocol

BVI1                       unassigned      YES DHCP   down                  down

Dot11Radio0                unassigned      YES unset  administratively down down

FastEthernet0              unassigned      YES other  up                    down

ap#



thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
CSCO11813149 ter, 02/25/2014 - 23:10
User Badges:

Hello Leo  I can't make any modification in flash  pls see a message below   ap# ap#sh ip interface brief Interface                  IP-Address      OK? Method Status                Protocol BVI1                       10.0.0.30       YES manual up                    up Dot11Radio0                unassigned      YES unset  administratively down down FastEthernet0              unassigned      YES other  up                    up ap#   ap#ping 10.0.0.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/200/1000 ms ap# ap# ap# ap#cop ap#copy tf ap#copy tftp flash:               ^ % Invalid input detected at '^' marker.  ap#   and when try to access to Rommon mode Ican't .  regards

Leo Laohoo qua, 02/26/2014 - 00:19
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Menad,


You can't make modifications because your AP booted the wrong IOS.  The IOS booted a controller-based IOS and you can't make any modifications.


The link I've posted above will show you the easiest method to load the correct IOS using the "Mode" button. 

Ações

This Discussion