×

Mensagem de aviso

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Dial-peer based on origin.

Perguntas não respondidas
ago 24th, 2015
User Badges:

I have a CUCM 10.5 and Gateway 2951 with a E1 link with R2-digital signage and 4 analog lines. My calls to mobile phones leave the analog lines (dial-peer voice 5 pots)

I need that calls to mobile phones, from the extension 7201-7220, leave for my E1 interface.

I made the following configuration, but it worked.

dial-peer voice 5 pots
 answer-address 26..
 trunkgroup FXO_CEL_SP_RJ
 corlist outgoing liga-celular
 description **Ligacao Telefone Movel Local**
 destination-pattern 0[7,9]T

dial-peer voice 111 pots
 corlist outgoing liga-celular
 description **Ligacao Telefone Movel Local**
 answer-address 72..
 destination-pattern 0[7,9]T
 port 0/0/0:0

 Can someone help me?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Ações

This Discussion