×

Mensagem de aviso

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Problema no Cisco SG300 28pp

Perguntas não respondidas
dez 21st, 2015
User Badges:

Antes de acessar ele da apenas esse erro:


i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1i2c_status fail: 1


Após acessar:


i2c_status fail: 1
12-Oct-2013 19:26:37 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x12e6 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:38 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x12e8 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:39 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11ae dev_num 1 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:40 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11ac dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:41 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11b0 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:42 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11b4 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:43 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11b8 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:44 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11bc dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:44 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11b2 dev_num 1 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:45 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11c0 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:46 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11ac dev_num 1 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:47 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11b0 dev_num 1 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:48 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11b4 dev_num 1 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
12-Oct-2013 19:26:49 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x11b8 dev_num 1 val 0x0) was detected: POE is Disabled untill Reset


Lembrando que ao reiniciar o switch demora muito para subir cerca de 15 min, porem ainda não resetei nem fiz nenhuma atualização nele alguém tem ideia do que possa ser?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ruben C dom, 12/27/2015 - 05:57
User Badges:
  • Bronze, 100 points or more
  • Community Spotlight Award,

    Portuguese Best Publication, April 2017

Viva,

Se após um factory default o problema persistir, o mesmo deverá ser trocado (RMA)

Ações

This Discussion