Answer Questions

Earn more points to boost your reputation

Modify Interests
You can improve these results by clicking on the "Modify Suggestions" button to choose specific communities you are interested in.
Hi everyone, For below identity NAT static(inside,dmz) 10.10.10.1 10.10.10.1 255.255.255.255 Where 10.10.10.1 is server behind the inside network...
7 min 52 sec ago
Hi Everyone, Just like on firewall we can see that connection is established between source and destination is there any command we can use to see...
12 min 52 sec ago
Dear Support Team. I would like to know the folllowing bug-ID more detail which is written by the release notes below. http://www.cisco.com/c/en/...
1 hour 2 min ago
Does anyone know how to log into the CSPC 2.7 GUI when the captcha image doesn't display? I have tried IE10,11,Edge,Firefox and chrome and all i ge...
1 hour 47 min ago
Call attempt from Lync 2013 via VDI HDXRTOP/2.2.100.949 (thin client) ends with "488 Not Acceptable Here (Error processing content)" from VCS side....
3 hours 32 min ago
I have a working CME 8.6 system except that when I set call forward all on a phone we get no audio on the number calls are forwarded to in either d...
9 hours 5 min ago
I'm brad new with SRST to be honest.  Does anyone have a well comment SIP SRST configuration from IOS they would be willing to share to handle conn...
13 hours 1 min ago
I have installed CUCDM 11.5 and HCM-F 11.5. But I failed to add a HCMF device in CUCDM. you can see the message in attached.
13 hours 9 min ago
Hi Team, after Discovery i see the same Device withe Multiple IP Addresses, every address is valid. Does this Device assume more Token than physica...
13 hours 36 min ago
Hello Experts The below features are supported in centralized clustering mode. Does it mean that all other types of traffic are handled equally in...
13 hours 55 min ago
Hi All, I am running into a very wierd behavior. I have 2 internal networks (inside, dmz) that I used static nat in order to get data to flow betwe...
by Y W
1 day 2 hours ago
Hi All I have a large collection of 3G/4G routers communicating over a private APN set by our service provider. I am having challenges maintaining...
1 day 10 hours ago
I want to update my VCS and Expressway software and wanted a little advice.   I’m running: Call Manager =: 9.1.2.10000-28 Presence Server = 9.1.1.1...
1 day 13 hours ago
I have a windows 7 server running on a desktop machine and connected this to nexus 3172PQ switch using GLC-T ( 1Gig SFP tranciever ) but the lit do...
1 day 13 hours ago
I have found that Ip device tracking only works on the first stack member on a 2960x stack as seen below.  You can see that it only lists devices o...
1 day 15 hours ago
Hi There! I'm currently using my 2901 to enable VPN access through PPTP and would like to enable digital certificates for VPN access in order to e...
in
1 day 15 hours ago
Hello, I have a requirement to override systemdefault timeout prompt still_there.wav with recorded prompt. Please explain how i can do that Thank...
1 day 19 hours ago
Hello, Please let me help to find if there is any bug with IOS 15.4.3.M7. Because when we tried to upgrade ios on cisco 2911 from 15.2.2.T3 to 15....
1 day 20 hours ago
Hi, We have Cisco Prime up and running, and i was wondering could Prime monitor more then just the basics, things like; -Etherchannel status (any...
by paul-d
1 day 20 hours ago
Hi, Can i create Xconnect between two end points without using mpls on this two points(routers), including not using mpls on the routers between th...
1 day 21 hours ago
Dear all, My branch office was connected to Head office via dark fiber (100mbps). Now We have also arranged an internet link of 6 MB as a backup li...
1 day 23 hours ago
I relocated a WAP 371 access point and it was and is setup as part of a cluster which is a single point setup.  This access point is now showing a...
2 days 7 hours ago