The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
What is the best way to migrate from 11.0 to 14. Since there was no existing contract we can only build new cluster and migrate the data from cucm 11 cluster to new cucm 14 cluster.. what all things to consider in this case?do we need to use new IP f...
Hello guys,i want to enable ssh on management port of C2960 and connect that port to gig 1/0/10 core switch,C2960 MGMT-VRF interface#interface gig0/0#no shut#vrf forwarding mgmt-vrf#ip address 192.168.10.10 255.255.255.0#ip route 0.0.0.0 0.0.0.0 192....
i have configured a pc1 on inside of the ASA firewall and second pc2 on outside of the ASA firewal. inside security level 100 and outside security level 0. when i add acl from inside to outside and access-group ,i get replies from PC2 back.when i add...
Hello all, I need your help to come up with a solution.A user is connected remotely to host location via flex Anyconnect remote vpn(vpn pool - 172.17.1.1 to 172.17.1.40). And also, there is a site to site VPN between the host location(192.168.1.0/24)...
Hello,I've tried on my own for too long to figure this out so looking for assistance please...My home network has FTTB providing 100 Mbps down and 40 Mbps up. Clients associated to the WAP371 (FW 1.3.0.7, the latest), however, get 0.5Mbps down and pi...
So i got my hands on an old FTD recently...a 3D7110/7120. Any ideas on how to repurpose it?i tried booting it up with Ubuntu, but it could only detect the management port. Any idea what specific network hardware/chipset they used for the other ports?
Anybody else getting retrospective detections for these files? They are created by legitimate svchost.exeLooks like they must be components of Dev HomeDev Home for Windows Developers | Microsoft LearnDevHome.RegistryPreview.exe47f2ecbbc1f812b63042c8...
Hi,I currently am experiencing some strange port security violations on ports that are connected to some pretty old cameras. They're all coming from what appear to be junk MAC addresses, like 0000.4006.fcce, 0000.4006.7587, and they're nowhere close ...
Hi everyone,I've a question about monitoring interface vlan traffic in nexus 9k.In nexus 9k does't count the interface vlan traffic by default and need to apply commad below:hardware profile svi-and-ai flex-stats-enablebut this command needs to disab...
Spoiler We have an odd situation on our network. We have several hosts that are on the far end of radio links that we cannot reach unless we clear the arp on our core switch and then initiate a continuous ping to. If the ping stops we cannot reach...
Hey everyone, I want to upgrade our office network and I'm trying to decide on a design that we should use. We want to forecast security so kindly assist, we have a firewall(Fortinet) that we want to connect to a Cisco switch(Either 2960 or 3750). Fr...