Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1942823members
1273462discussions

Community Activity

Poor 5Ghz throughput - 9800 / 17.9.4a / 1800-series APs

Hi,Per the title, I've got an issue with 5Ghz clients that have good signal strength because they are sat almost underneath the AP (1832 APs) yet but struggling to get more than 1Mbps throughput.  I can see the channel utilisation is over 50% but zer...

Cisco Nexus 3000 Password Recovery

Hi everyone,I am trying to recover the console password of a Cisco Nexus 3000; however, for some weird reason, whatever I am trying is not working. Using CTRL + C, I am able login to the “switch(boot)#” The switch does not take the command “dir” I tr...

Flexconnect on Slow Links

Hi, We had a deployment of centralised WLC (earlier 3504) with flexconnect configured for remote sites (centralized auth, local switching, ISE CWA. ISE, WAPs and clients are on same LAN). These sites are connected to the controller using satellite li...

Bought a used ASA5585-X, can't get encryption PAK

Hi,I recently bought an end of life'd ASA5585-X SSP-20, and I'd like to get the free 3DES/AES encryption PAK, but the license portal always tells me it failed and to contact GLO.  Is this licensing portal just down for this particular option, or mayb...

WAP150 répéteur Wifi sans Ethernet

Bonjour,Je souhaite savoir s'il est possible de se passer de câble Ethernet branché au routeur, en connectant le routeur à la borne en wifi. Que la borne reçoive le réseau du routeur via le wifi et non par câble Ethernet.La borne est une WAP150.Merci...

Gerard67 by Level 1
  • 29 Views
  • 0 replies
  • 0 Helpful votes

Error code 10 on dot11Radio interface

Hello , i have configure my Cisco Aironet Access point and the dot11Radio interface keeps restarted automatically with error code 10.i have already update the IOS image to the latest version , but still encounter the same problem . 

Cisco Secure access config guide

HI I plan to implement Cisco Secure access POC for a client. there is little material about this solution. is there any one with additional material that i can use. Thanks

BGP flapping with MTU mismatch

Hello Everyone, This is a typical issue but I want more details, in many cases when BGP flaps every 180 secs "Hold timer", when we adjust MTU the same at both sides, it works fine. But how could MTU affect the keepalive messages which are only 19 byt...

AS Override

BGP (Border Gateway Protocol) est le protocole de routage de l'Internet. Une de ses principales caractéristiques est la gestion des chemins AS (Autonomous System), où chaque AS est un réseau administré de manière indépendante. Lorsqu'un paquet trav...

M02@rt37 by VIP
  • 39 Views
  • 0 replies
  • 0 Helpful votes

Port Security Violations - Rogue MACs?

Hi, I currently am experiencing some strange port security violations on ports that are connected to some pretty old cameras. They're all coming from what appear to be junk MAC addresses, like 0000.4006.fcce, 0000.4006.7587, and they're nowhere close...

Você sabia o que é um NOC?

Você sabia o que é um NOC?Um NOC significa (Network Operations Center), ou Central de Operações de Rede: é o uma localização centralizada onde os técnicos de TI monitoram, gerenciam e mantêm redes de computadores. O NOC tem a responsabilidade de geri...