00:39:03: dot1x-sm:Posting QUIET_WHILE_EXPIRE on Client=16EC5E0
00:39:03:     dot1x_auth Fa0: during state auth_held, got event 5(quietWhile_expire)
00:39:03: @@@ dot1x_auth Fa0: auth_held -> auth_restart
00:39:03: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_held_exit called
00:39:03: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_restart_enter called
00:39:03: dot1x-ev:Sending create new context event to EAP for 001d.927f.3fcb
00:39:03: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_held_restart_action called
00:39:03: dot1x-sm:Posting !EAP_RESTART on Client=16EC5E0
00:39:03:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
00:39:03: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
00:39:03: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_connecting_enter called
00:39:03: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_restart_connecting_action called
00:39:04: dot1x-packet:Received an EAP request packet from EAP for mac 001d.927f.3fcb
00:39:04: dot1x-sm:Posting RX_REQ on Client=16EC5E0
00:39:04:     dot1x_auth Fa0: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
00:39:04: @@@ dot1x_auth Fa0: auth_connecting -> auth_authenticating
00:39:04: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_authenticating_enter called
00:39:04: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_connecting_authenticating_action called
00:39:04: dot1x-sm:Posting AUTH_START on Client=16EC5E0
00:39:04:     dot1x_auth_bend Fa0: during state auth_bend_idle, got event 4(eapReq_authStart)
00:39:04: @@@ dot1x_auth_bend Fa0: auth_bend_idle -> auth_bend_request
00:39:04: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_request_enter called
00:39:04: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1  data: 
00:39:04: dot1x-ev:FastEthernet0/1:Sending EAPOL packet to group PAE address
00:39:04: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/1.
00:39:04: dot1x-registry:registry:dot1x_ether_macaddr called
00:39:04: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/1
00:39:04: EAPOL pak dump Tx
00:39:04: EAPOL Version: 0x2  type: 0x0  length: 0x0005
00:39:04: EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1 
00:39:04: dot1x-packet:dot1x_txReq: EAPOL packet sent to client (001d.927f.3fcb)
00:39:04: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_idle_request_action called
00:39:35: dot1x-packet:Received an EAP request packet from EAP for mac 001d.927f.3fcb
00:39:35: dot1x-sm:Posting EAP_REQ on Client=16EC5E0
00:39:35:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 7(eapReq)
00:39:35: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_request
00:39:35: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_request_request_action called
00:39:35: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_request_enter called
00:39:35: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1  data: 
00:39:35: dot1x-ev:FastEthernet0/1:Sending EAPOL packet to group PAE address
00:39:35: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/1.
00:39:35: dot1x-registry:registry:dot1x_ether_macaddr called
00:39:35: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/1
00:39:35: EAPOL pak dump Tx
00:39:35: EAPOL Version: 0x2  type: 0x0  length: 0x0005
00:39:35: EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1 
00:39:35: dot1x-packet:dot1x_txReq: EAPOL packet sent to client (001d.927f.3fcb)
Switch#
00:40:06: dot1x-packet:Received an EAP request packet from EAP for mac 001d.927f.3fcb
00:40:06: dot1x-sm:Posting EAP_REQ on Client=16EC5E0
00:40:06:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 7(eapReq)
00:40:06: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_request
00:40:06: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_request_request_action called
00:40:06: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_request_enter called
00:40:06: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1  data: 
00:40:06: dot1x-ev:FastEthernet0/1:Sending EAPOL packet to group PAE address
00:40:06: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/1.
00:40:06: dot1x-registry:registry:dot1x_ether_macaddr called
00:40:06: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/1
00:40:06: EAPOL pak dump Tx
00:40:06: EAPOL Version: 0x2  type: 0x0  length: 0x0005
00:40:06: EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1 
00:40:06: dot1x-packet:dot1x_txReq: EAPOL packet sent to client (001d.927f.3fcb)
00:40:36: dot1x-ev:Received an EAP Timeout on FastEthernet0/1 for mac 001d.927f.3fcb
00:40:36: dot1x-sm:Posting EAP_TIMEOUT on Client=16EC5E0
00:40:36:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 12(eapTimeout)
00:40:36: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_timeout
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_timeout_enter called
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_request_timeout_action called
00:40:36:     dot1x_auth_bend Fa0: idle during state auth_bend_timeout
00:40:36: @@@ dot1x_auth_bend Fa0: auth_bend_timeout -> auth_bend_idle
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_bend_idle_enter called
00:40:36: dot1x-sm:Posting AUTH_TIMEOUT on Client=16EC5E0
00:40:36:     dot1x_auth Fa0: during state auth_authenticating, got event 14(authTimeout)
00:40:36: @@@ dot1x_auth Fa0: auth_authenticating -> auth_fallback
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_authenticating_exit called
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_fallback_enter called
00:40:36: dot1x-sm:Posting AUTH_FAIL on Client=16EC5E0
00:40:36:     dot1x_auth Fa0: during state auth_fallback, got event 15(authFail)
00:40:36: @@@ dot1x_auth Fa0: auth_fallback -> auth_authc_result
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_authc_result_enter called
00:40:36: dot1x-sm:Posting AUTHC_FAIL on Client=16EC5E0
00:40:36:     dot1x_auth Fa0: during state auth_authc_result, got event 23(authcFail)
00:40:36: @@@ dot1x_auth Fa0: auth_authc_result -> auth_held
00:40:36: dot1x-sm:Posting RESTART on Client=16EC5E0
00:40:36:     dot1x_auth Fa0: during state auth_held, got event 13(restart)
00:40:36: @@@ dot1x_auth Fa0: auth_held -> auth_restart
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_held_exit called
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_restart_enter called
00:40:36: dot1x-ev:Resetting the client 001d.927f.3fcb
00:40:36: dot1x-sm:Posting !EAP_RESTART on Client=16EC5E0
00:40:36:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
00:40:36: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_connecting_enter called
00:40:36: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_restart_connecting_action called
00:40:38: dot1x-packet:Received an EAP request packet from EAP for mac 001d.927f.3fcb
00:40:38: dot1x-sm:Posting REAUTH_MAX on Client=16EC5E0
00:40:38:     dot1x_auth Fa0: during state auth_connecting, got event 11(reAuthMax)
00:40:38: @@@ dot1x_auth Fa0: auth_connecting -> auth_disconnected
00:40:38: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_disconnected_enter called
00:40:38: dot1x-sm:Fa0/1:001d.927f.3fcb:auth_disconnected_enter sending canned failure to version 1 supplicant
00:40:38: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x4  id: 0x3  length: 0x0004 type: 0x0  data: 
00:40:38: dot1x-ev:FastEthernet0/1:Sending EAPOL packet to group PAE address
00:40:38: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/1.
00:40:38: dot1x-registry:registry:dot1x_ether_macaddr called
00:40:38: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/1
00:40:38: EAPOL pak dump Tx
00:40:38: EAPOL Version: 0x2  type: 0x0  length: 0x0004
00:40:38: EAP code: 0x4  id: 0x3  length: 0x0004
00:40:38: dot1x-packet:dot1x_auth_txCannedFail: EAPOL packet sent to client (001d.927f.3fcb)
00:40:38:     dot1x_auth Fa0: idle during state auth_disconnected
00:40:38: @@@ dot1x_auth Fa0: auth_disconnected -> auth_restart
00:40:38: dot1x-ev:dot1x_switch_port_unauthorized: Unauthorizing interface FastEthernet0/1
00:40:38: dot1x-ev:dot1x_switch_is_dot1x_forwarding_enabled: Forwarding is disabled on Fa0/1
00:40:38: dot1x-ev:dot1x_vlan_assign_client_deleted on interface FastEthernet0/1
00:40:38:     dot1x_auth Fa0: initial state auth_initialize has enter
00:40:38: dot1x-sm:Fa0/1:0000.0000.0000:auth_initialize_enter called
00:40:38:     dot1x_auth Fa0: during state auth_initialize, got event 0(cfg_auto)
00:40:38: @@@ dot1x_auth Fa0: auth_initialize -> auth_disconnected
00:40:38: dot1x-sm:Fa0/1:0000.0000.0000:auth_disconnected_enter called
00:40:38:     dot1x_auth Fa0: idle during state auth_disconnected
00:40:38: @@@ dot1x_auth Fa0: auth_disconnected -> auth_restart
00:40:38: dot1x-sm:Fa0/1:0000.0000.0000:auth_restart_enter called
00:40:38: dot1x-ev:Sending create new context event to EAP for 0000.0000.0000
00:40:38:     dot1x_auth_bend Fa0: initial state auth_bend_initialize has enter
00:40:38: dot1x-sm:Fa0/1:0000.0000.0000:auth_bend_initialize_enter called
00:40:38:     dot1x_auth_bend Fa0: initial state auth_bend_initialize has idle
00:40:38:     dot1x_auth_bend Fa0: during state auth_bend_initialize, got event 16383(idle)
00:40:38: @@@ dot1x_auth_bend Fa0: auth_bend_initialize -> auth_bend_idle
00:40:38: dot1x-sm:Fa0/1:0000.0000.0000:auth_bend_idle_enter called
00:40:38: dot1x-ev:Created a client entry for the supplicant 0000.0000.0000
00:40:38: dot1x-ev:Created a default authenticator instance on FastEthernet0/1
00:40:38: dot1x-sm:Posting !EAP_RESTART on Client=16EC5E0
00:40:38:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
00:40:38: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
00:40:38: dot1x-sm:Fa0/1:0000.0000.0000:auth_connecting_enter called
00:40:38: dot1x-sm:Fa0/1:0000.0000.0000:auth_restart_connecting_action called
00:40:39: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
00:40:39: dot1x-sm:Posting RX_REQ on Client=16EC5E0
00:40:39:     dot1x_auth Fa0: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
00:40:39: @@@ dot1x_auth Fa0: auth_connecting -> auth_authenticating
00:40:39: dot1x-sm:Fa0/1:0000.0000.0000:auth_authenticating_enter called
00:40:39: dot1x-sm:Fa0/1:0000.0000.0000:auth_connecting_authenticating_action called
00:40:39: dot1x-sm:Posting AUTH_START on Client=16EC5E0
00:40:39:     dot1x_auth_bend Fa0: during state auth_bend_idle, got event 4(eapReq_authStart)
00:40:39: @@@ dot1x_auth_bend Fa0: auth_bend_idle -> auth_bend_request
00:40:39: dot1x-sm:Fa0/1:0000.0000.0000:auth_bend_request_enter called
00:40:39: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1  data: 
00:40:39: dot1x-ev:FastEthernet0/1:Sending EAPOL packet to group PAE address
00:40:39: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/1.
00:40:39: dot1x-registry:registry:dot1x_ether_macaddr called
00:40:39: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/1
00:40:39: EAPOL pak dump Tx
00:40:39: EAPOL Ver



Hi can anyone help me to configure to use dot1x authentication method for my cisco 2960 switch.
I am trying to use microsoft IAS as a radius server.
i configured certificate cervices also and clients & computers are getting certificates.

i configured also my switch to use dot1x authentication as

aaa new-model
aaa authentication dot1x default group radius
interface f0/1
switchport mode access

dot1x system-auth-control
radius-server host 10.0.0.110 auth-port 1645 acct-port 1646 key ****
interface f0/1
dot1x port-control auto

but still my computer cannot connect to the switch
i debug dot1x all

and i got the result which i have attached with this message.